Buttons - Siemens WM16XMA9DN User Manual And Assembly Instructions

Hide thumbs Also See for WM16XMA9DN:
Table of Contents

Advertisement

en Buttons

Buttons

Buttons
Below is an overview of the buttons and their setting options.
Buttons
The selection of programme settings depends on the selected programme. You
can see the selection options for each programme in the overview for
→ "Programmes", Page 26.
Button
(Start/Reload/
Pause)
varioSpeed 
(stainRemoval Sys-
tem)
-  ⁠   + (Ready in)
°C (Temperature Selec-
tion)
(Spin Speed Reduc-
tion)
(mains switch)
⁠   3 sec. (Child Lock 3
sec.)
(Spin Speed Reduc-
tion)
(Prewash)
24
Selection
¡ Start
¡ Cancel
¡ Pause
¡ Activate
¡ Deactivate
Multiple selection
1–24 hours
⁠ – 90 °C
0 – 1600 rpm
¡ Switch on
¡ Switch off
¡ Activate
¡ Deactivate
Basic settings
¡ Activate
¡ Deactivate
Description
Start, cancel or pause the programme.
Activate or deactivate a short washing pro-
gramme.
Note: Energy consumption increases.
The washing result is not affected by this.
Select the type of stain.
The temperature, drum movement and soaking
time are all adjusted to suit the type of stain.
Set the programme end.
The programme duration is already included in
the set number of hours.
Once the programme has started, the pro-
gramme duration is displayed.
Adjust the temperature in °C.
Adjust the spin speed or deactivate the spin
cycle.
If 0 is selected, the water is drained and the spin
cycle is deactivated at the end of the washing
cycle. The laundry stays wet inside the drum.
Switch the appliance on or off.
Activate or deactivate the childproof lock.
Disable the control panel to prevent unwanted or
accidental operation.
If the childproof lock is activated and the appli-
ance has been switched off, the childproof lock
remains activated.
→ "Childproof lock", Page 39
Change the basic settings for the appliance.
→ "Changing the basic settings", Page 40
Activate or deactivate prewash, e.g. for washing
heavily soiled laundry.

Advertisement

Table of Contents
loading

Table of Contents