Advertisement
3. Logging in to the web interface eLAN-RF-Wi-003
After connecting the eLAN-RF-Wi-003 to the power source, after around 1 minute you will see
displayed in the list of available WiFi networks the name: ELAN-RF-WI
Connect to the network by entering the password: 00000000
Write into the panel Address (in the Internet browser) the set IP address of the product eLAN-
RF-Wi-003. (Upon the first configuration, enter the factory-assigned default IP address:
192.168.1.1)
After confirming the entered IP address, the web server's login page will come up.
The factory settings for signing in as administrator are:
Login: admin
Password: elkoep
Login options:
It is possible to log into the eLAN-RF-Wi-003 web interface either as the administrator
(admin) with full access to controls and settings, or as the user (user), for whom only the
panel itself is displayed.
The user thus only has the option of controlling the device (the factory setting of the password
for logging in as admin and user is: elkoep).
Both users log into the same dialog field (Login, Password), but each uses his/her own name
and password.
Confirm the log in by pressing: Login.
Note:
Perform RESET of the eLAN-RF-Wi-003 by a long press of the button on the front panel of the device until the
yellow LED begins flashing. eLAN is restarted at the moment the LED stops flashing. The IP address and login
data return to factory settings.
15.11.2019
02-32/2017 / rev.7
15.11.2019
eLAN-RF-Wi-003
6 of 17
Page
Advertisement
