iNels eLAN-RF-Wi-003St Instruction Manual page 13

eLAN-RF-Wi-003

Button Devices is used for adding RF actuators to the eLAN-RF-Wi-003.
Button (+) - add a new RF element:
1. Product Type – select RF element
2. Address – enter the address of the RF element that is listed right on the box of the added
EF element (six-character code).
3. Label - any naming of the element, e.g. "Kitchen light".
4. Type - select the type of icon (e.g. light), which will be displayed on the floorplan.
Create, you will store the RF actuator in the eLAN-RF-Wi-003.
Button - remove all elements.
13 of 17
15.11.2019 Page
02-32/2017 / rev.7
15.11.2019