Advertisement
Buttonl Scenes – Here any scenes are created based on user requirements.
It is possible to create scenes only after you add rooms and actuators.
Button (+) - add a new scene:
1. Label - enter any name of the scene (you can use diacritical marks and spaces in
between...).
2. Actions - (+) – add an RF element.
When adding an actuator, its function-action is set switching, dimming, etc.).
If for an actuator, you select the function ON, you must still confirm this function by its precise status in
the table Choose value, e.g. true – for switching on or false – switching off.
After adding all actuators and their required functions, click on Create, thereby saving the entire
scene.
15.11.2019
02-32/2017 / rev.7
15.11.2019
eLAN-RF-Wi-003
15 of 17
Page
Advertisement
