Table of Contents
Advertisement
Alternate Method
When applying any load to the tailgate,
distribute the weight evenly across the
width of the tailgate. This applies to all
tailgate types.
Use a load-distributing member (1).
Secure the ramp to the bumper (2).
Vehicle Security
This vehicle has theft-deterrent features;
however, they do not make the vehicle
impossible to steal.
Vehicle Alarm System
The indicator light, on the driver door
switch, indicates the status of the system.
See Power Door Locks 0 14
Arming the Alarm System
1. Turn off the vehicle.
2. Lock the vehicle in one of three ways:
Use the remote key.
Use the Keyless Access system.
With a door open, press
interior of the door.
3. After 30 seconds the alarm system will
arm, and the indicator light will begin to
slowly flash. Pressing
on the remote
Keys, Doors, and Windows
key a second time will bypass the
30-second delay and immediately arm
the alarm system.
The vehicle alarm system will not arm if the
doors are locked with the mechanical key.
If the driver door is opened without first
unlocking with the remote key, the horn will
chirp and the lights will flash to indicate
pre-alarm. If the vehicle is not started,
or the door is not unlocked by pressing
on the remote key during the 10-second
pre-alarm, the alarm will be activated.
The alarm will also be activated if a
passenger door, the tailgate, or the hood is
opened without first disarming the system.
When the alarm is activated, the turn
signals flash and the horn sounds for about
30 seconds. The alarm system will then
re-arm to monitor for the next unauthorized
event.
Disarming the Alarm System
To disarm the alarm system or turn off the
on the
alarm if it has been activated:
Press
on the remote key.
Unlock the vehicle using the Keyless
Access system.
Start the vehicle.
23
Advertisement
Table of Contents
