Table of Contents
Advertisement
Car Wash Mode
This vehicle includes a Car Wash Mode that
allows the vehicle to remain in N (Neutral)
for use in automatic car washes.
Car Wash Mode is not to be used for vehicle
towing. If the vehicle needs to be towed,
see Towing the Vehicle 0 350.
Caution
The vehicle is not designed to stay in
N (Neutral) for extended periods of time.
It will automatically shift into P (Park) if
left in Car Wash Mode.
Car Wash Mode (Vehicle On) Driver In
Vehicle
To place the vehicle in N (Neutral) with the
vehicle on and occupied:
1. Drive to the entrance of the car wash.
2. Apply the brake pedal.
3. Shift to N (Neutral).
4. Release the brake pedal.
5. The vehicle is now ready for the
car wash.
Car Wash Mode (Vehicle On) Driver Out of
Vehicle
To place the vehicle in N (Neutral) with the
vehicle on and unoccupied:
1. Drive to the entrance of the car wash.
2. Apply the brake pedal.
3. Open the door.
4. Shift to N (Neutral). Then release the
brake pedal.
5. The indicator should continue to show N.
If it does not, repeat Steps 2 4.
6. Exit the vehicle and close the door. The
vehicle is now ready for the car wash.
7. The vehicle may automatically shift into
P (Park) upon reentry.
D : This position is for normal driving.
If more power is needed for passing, press
the accelerator pedal down.
To shift into D (Drive):
1. Bring the vehicle to a complete stop.
2. From the center position, move the shift
lever back.
If the vehicle is in P (Park), press the
shift lock release button while pulling
the shift lever back.
D will illuminate in red.
Driving and Operating
3. After releasing the shift lever, it will
return to the center position.
To shift out of D (Drive):
1. Bring the vehicle to a complete stop.
2. Shift to the desired gear.
Caution
Spinning the tires excessively may
damage the electric drive unit. The repair
will not be covered by the vehicle
warranty. If you are stuck, do not spin
the tires.
When stopping on a hill, use the brakes to
hold the vehicle in place.
When shifting to P (Park) on a hill, use the
brakes to hold the vehicle then shift to
P (Park).
L : This position provides additional coast
braking for driving downhill, towing a trailer,
or hauling a heavy load
To use this feature:
1. Ensure the vehicle is in D (Drive).
2. From the center position, move the shift
lever back.
After releasing the shift lever, it will
return to the center position
189
Advertisement
Table of Contents
