Table of Contents
Advertisement
Remote keys 1 and 2 are linked to seating
positions of memory 1 or 2. See Memory
Seats 0 40.
Keyless Unlocking/Locking from the
Driver Door
When the doors are locked and the remote
key or digital key is within 1 m (3 ft) of the
door handle, pressing the lock/unlock button
on the driver door handle will unlock the
driver door. If the lock/unlock button is
pressed again within five seconds, the doors,
tailgate, and hood will unlock.
Driver Side Shown, Passenger Side Similar
Pressing the lock/unlock button will cause
all doors to lock if any of the following
occur:
It has been more than five seconds since
the first lock/unlock button press.
Two lock/unlock button presses were
used to unlock all doors.
Any vehicle door has been opened and all
doors are now closed.
Keyless Unlocking/Locking from the
Passenger Doors
When the doors are locked and the remote
key or digital key is within 1 m (3 ft) of the
door handle, pressing the lock/unlock button
on a passenger door handle will unlock all
doors. Pressing the lock/unlock button will
cause all doors to lock if any of the
following occur:
The lock/unlock button was used to
unlock all doors.
Any vehicle door has been opened and all
doors are now closed.
Disable/Enable Keyless Unlocking of Exterior
Door Handles, Tailgate, and Hood
Keyless unlocking of the exterior door
handles, tailgate, and hood can be disabled
and enabled.
Keys, Doors, and Windows
Disabling Keyless Unlocking:
With the vehicle off, press and hold
on the remote key at the same time for
approximately three seconds. The turn signal
lamps will flash four times quickly to
indicate access is disabled. Using any
exterior handle to unlock the doors, open
the tailgate, or open the hood will cause the
turn signal lamps to flash four times quickly,
indicating access is disabled. If disabled,
disarm the alarm system before starting the
vehicle.
Disabling Keyless Unlocking may also be
configured under Vehicle Personalization
0 118.
Enabling Keyless Unlocking:
With the vehicle off, press and hold
on the remote key at the same time for
approximately three seconds. The turn signal
lamps will flash twice quickly to indicate
access is enabled.
Enabling Keyless Unlocking may also be
configured under Vehicle Personalization
0 118.
9
and
and
Advertisement
Table of Contents
