Voice Recognition - GMC HUMMER EV 2022 Owner's Manual

146 Infotainment System
not mean there is a problem with the
system. As the map data is updated, more
detail can become available for areas that
previously had limited detail.

Voice Recognition

If equipped, voice recognition Google
Assistant allows for hands-free operation
within the audio, phone and navigation. This
feature can be started by pressing
steering wheel, touching Google Assistant on
the Home screen, or by using the wake up
words Hey Google or OK Google.
However, not all features within these areas
are supported by voice commands.
Using Voice Recognition
Voice recognition becomes available once
the system is initialized. This begins when
the vehicle is turned on. Initialization may
take a few moments.
1. Press on the steering wheel controls,
touch Google Assistant on the Home
screen, or use the wake up words Hey
Google or OK Google to activate voice
recognition.
2. Clearly speak one of the commands
described later in this section.
A voice recognition system prompt can
be interrupted while it is playing by
pressing again.
Canceling Google Assistant
Press on the steering wheel controls
to cancel the Google Assistant request.
Helpful Hints for Speaking Commands
Voice recognition identifies commands that
on the
are naturally stated in sentence form,
or direct commands that state the
application and the task.
For best results:
Speak the command naturally, not too
fast, not too slow.
Use direct commands without a lot of
extra words. For example, Call <name>
at work, Play followed by the artist or
song name, or Tune followed by the
radio station number.
Direct commands are more clearly
understood by the system. An example of a
direct command is Dial <number> .
If a cell phone number was saved with a
name and a place, the direct command
should include both. For example Call
<name> at work.
Voice Recognition for the Radio
If browsing the audio sources when voice is
touched, the voice recognition commands
for AM, FM, and SiriusXM (if equipped) are
available.
Tune to <AM frequency> AM : Tune to
the radio station frequency identified in the
command (like nine fifty ).
Tune to <FM frequency> FM : Tune to the
radio station frequency identified in the
command (like one oh one point one ).
Play channel <SXM channel number> on
SiriusXM : Tune to the SiriusXM radio
station channel number identified in the
command.
Play <SXM channel name> on Sirius XM :
Tune to the SiriusXM radio station channel
name identified in the command.
Voice Recognition for the Phone
Make sure the phone is paired using
Bluetooth to use the phone related voice
commands.
Call <contact name> : Initiate a call to a
stored contact. The command may include
location if the contact has location numbers
stored.