Installing The Scanner - Fujitsu FI-6750S User Manual

2

Installing the Scanner

The following describes how to install the scanner.
1
Place the scanner at its installation site.
The outer dimensions and the spaces required for installing the respective scanner types are as
follows:
ADF type
686
(27.0)
2
Unlock the Transport Lock (Flatbed type only).
Using a coin or similar, rotate the Transport Lock counterclockwise by 90 degree to unlock it.
3
Adjust the position of the ADF (Flatbed type only).
1) Holding the handle, lift open the Document Cover.
2) Remove the ADF Lock Screws, and then set them to the Lock Screw Storage Holes.
12
300 (11.8)
432 (17.0)
329
(13.0)
1179
(46.4)
Flatbed type
390 (15.3)
700
500
(19.6)
(27.5)
(Unit: mm/inches)
640 (25.1)
342
(13.4)
690 (27.1)
1030 (40.5)
Outer dimensions
Installation space