Fujitsu FI-6750S User Manual page 24

10
Select the [Scan] menu
The [Scan Settings] dialog box appears.
11
Clear the [Save to file] checkbox.
12
Click the [Scanner Setting] button.
The scanner driver's setting dialog box appears.
13
Configure scanner settings such as the resolution and paper size.
■
FUJITSU TWAIN 32 scanner driver
Configure scan settings, and then click the [OK]
button.
■
FUJITSU ISIS scanner driver
Configure scan settings, and then click the [OK]
button.
24
If "Kofax VRS Scanner" does not appear in the list, check if the interface cable is properly connected
to SCSI/USB Connector 2.
If "Kofax VRS Scanner" does not appear even after you have connected the cable properly, then refer
to "Chapter 8 Troubleshooting" in the Operator's Guide.
[Scan Settings].
You only check the operation now, so you do not have to
save to file.
The setting dialog box of the scanner driver
may be displayed again after the [OK] button
is clicked. In such case, click the [Scan]
button in the dialog box.