Related Manuals for Vent-Axia Visionex
Summary of Contents for Vent-Axia Visionex
- Page 1 Visionex PIR Controller Fitting & Wiring Instructions (Suitable for use with a single Vent-Axia fan up to 600W) Stock Ref. 459623B PIR Visionex Mains 220-240V PLEASE RETAIN THESE INSTRUCTIONS WITH THE PRODUCT.
- Page 2 Visionex always looks for movement within its range. A hot body moving across the detection zones will activate the Visionex which will switch on the connected load. If the body becomes still or moves out of range, the Visionex stays on for an adjustable overrun time and then switches the connected load off.
- Page 3 2 clips located at the bottom of the bezel Fig 1. Fit the Visionex to the mounting box with the two screws provided. Do not over-tighten the screws. Do not trap any wires when fitting the two pieces together.
- Page 4 Vent-Axia guarantees its products for two years from date of purchase against faulty material or workmanship. In the event of any part being found to be defective, the product will be repaired, or at the Company’s option replaced, without charge, provided that the product:- ...