System Requirements - Lenovo ThinkPad WMTB-177N User Manual

Enterprise wireless display adapter

Hide thumbs

Table Of Contents

Table of Contents

HDMI connector

The HDMI connector is used to connect an external HDMI monitor to the wireless display adapter using

an HDMI cable.

Headset connector

The headset connector is used to connect a headset or a speaker.

VGA-out connector

The VGA-out connector is used to connect an external VGA monitor to the wireless display adapter using a

VGA cable.

Note: The HDMI connector and the VGA-out connector cannot be used at the same time. If both of them are

connected, only the VGA-out connector functions.

VGA-in connector

The VGA-in connector is used to connect your notebook computer to the wireless display adapter using

a VGA cable. You can connect your notebook computer to the wireless display adapter either through

wireless connection or using the VGA-in connector.

Note: It is not recommended that you use both the wireless connection and the VGA-in connector with

multiple notebook computers at the same time. Otherwise only the screen of the notebook computer that is

connected to the VGA-in connector will be displayed on the monitor.

Hang slot

The hang slots are used to hang the wireless display adapter on the wall with two screws.

Note: The screws are not included in your option package. If necessary, purchase two screws.

Emergency reset hole

If the wireless display adapter does not respond, restart the wireless display adapter by inserting a

straightened paper clip into the emergency reset hole.

Machine type and model label

The machine type and model label identifies your wireless display adapter. When you contact Lenovo for

help, the machine type and model information helps support technicians identify your wireless display

adapter and provide faster service.