1.0
INTRODUCTION
1.0
INTRODUCTION
Dear User,
Congratulations on your decision to purchase a Motion Concepts F-Series power positioning system. Our
goal at Motion Concepts is to provide you with the best possible seating system. Our close work with many
health care professionals has given us an understanding of the challenges that you may confront, and has
enabled us to design systems that will help to meet your individual positioning needs. We are confident
that you will be delighted with your new positioning system and as you grow or your needs change, your
new seating system will be able to grow and change with you.
This user manual applies specifically to our Motion Concepts Seating System. It is important that
you read and understand its contents. It is also equally important that you read and understand
the Operating Manual/Instructions provided for your wheelchair power base.
Motion Concepts or their statutory representatives can accept no liability in cases in which the wheelchair
has not been adapted to suit the users' disabilities.
Some maintenance and adjustments can be performed by the user or his/her attendants, however, due to the
complexity of the Motion Concepts Seating Systems certain adjustments do require technical training and
may only be carried out by your authorized Motion Concepts specialist dealer. Damages and errors caused
by non-observance of the operating manual or as a result of incorrect maintenance are excluded from all
warranties/guarantees.
Contact Information:
If you have any questions or require support concerning your wheelchair seating system, please contact
your authorized Motion Concepts Dealer, who has the necessary training and equipment to meet your
needs, or you may contact Motion Concepts directly for assistance. The more we are able to understand
your needs, the better we will be able to meet them.
CANADA
Motion Concepts LP
84 Citation Drive, Unit 1
Concord, Ontario
L4K 3C1
USA
Motion Concepts
700 Ensminger Rd, Suite 112
Tonawanda, New York
14150
- 6 -
Important!
Tel (local):
Tel (toll free):
Fax:
Tech Service:
@
www.
Tel.:
Tel (toll free):
Fax:
Tech Service:
905-695-0134
866-748-7943
905 695 0138
800-680-4191
info@motionconcepts.com
www.motionconcepts.com
716-447-0050
866-433-6818
888-433-6834
888-433-6818
Need help?
Do you have a question about the F Series and is the answer not in the manual?