Related Manuals for IGBT BLUEARC 200STI
Summary of Contents for IGBT BLUEARC 200STI
- Page 1 BLUEARC 200STI OWNERS MANUAL (Plastic Panel) INVERTER IGBT DC PULSE TIG/MM WELDING MACHINE...
-
Page 2: General Remarks
WARNING! Read the instructions before installing and starting the device! 1. GENERAL REMARKS Commissioning and operation of the device may only be carried out after thoroughly reading this Operator's Manual. Due to the constant technical development of the device, some of its functions may be modified and their operation may differ in detail from the descriptions in the manual. -
Page 3: General Description
The set includes a TIG welding torch, electrode cable and ground cable. The machine is made in IGBT technology that allows a significant reduction in the weight and dimensions of the welder and an increase in efficiency while reducing energy consumption. -
Page 4: Preparing The Machine For Work
4.2 Parameter adjustment ranges Model BLUEARC 200STI Power supply voltage AC 230V ±10% 50Hz/60Hz AC 110V ±10% 50Hz/60Hz Current MMA: 10-180 A TIG:10-200 A MMA: 10-130 A TIG:10-140 A 0 – 15 s Gas outflow(Post Gas) 0 – 10 s... - Page 5 the control plug of the clamp should be placed in the socket (6), and the gas connector plug in the socket of the quick coupler (7). The gas pipe from the regulator should be connected and secured to the gas connector (16) located on the back of the housing.
- Page 6 Source mode selector switch (two-stroke / four-stroke) The switch is only active for TIG welding. In the two-touch mode, pressing the switch on the handle of the handle will turn on the ionizer and ignite the arc. Welding is carried out with the switch pressed. Releasing the switch will end welding.
- Page 7 The control panel lights up, the 1. The device has been overheated. Wait a few minutes. After the fan runs, the LED lights up diode goes out, continue welding. 1. Check the polarity of the welding cable connection Unsatisfactory weld quality 2.
-
Page 8: Limited Warranty
IGBT Equipment Warranty Welding Material Sales Effective Jan 1, 2019 Limited Warranty This warranty applies to the original purchaser and is subject to the terms and conditions listed below. This Limited Warranty is for new equipment sold after the above date, providing coverage for defects in material and workmanship at the time it is shipped from the factory.