Viewing Images On Your Pc - FujiFilm Finepix S3100 Quick Start

Viewing images on your PC

A. Install Software
Do not connect the camera to your PC until the software
installation is completed.
1. Turn your PC on and start up Windows.
●
!
Users of Windows 2000 Professional or Windows XP should log in
by using a system administrator account (e.g. "Administrator").
2. Quit all other active applications until no applications are
shown in the taskbar.
3. Load the enclosed CD-ROM into the CD-ROM drive. The
installer starts up automatically.
4. The Setup screen appears.
Click the [Installing FinePixViewer] button.
5. After installation completed, press [Restart] button.
B. Connect the Camera to your PC
1. Load an xD-Picture Card containing photographed images
into your camera.
2. Set the "USB MODE" setting in the "SET-UP" menu to digital
¶
camera " ". (Refer to "USING THE SET-UP SCREEN" in
the owner's manual.)
ＳＥＴ−ＵＰ ＳＥＴ−ＵＰ
１ ２ ３
ＤＡＴＥ／ＴＩＭＥ ＤＡＴＥ／ＴＩＭＥ
：ＳＥＴ ：ＳＥＴ
ＴＩＭＥ ＤＩＦＦＥＲＥＮＣＥ ＴＩＭＥ ＤＩＦＦＥＲＥＮＣＥ
：ＳＥＴ ：ＳＥＴ
ＦＲＡＭＥ ＮＯ． ＦＲＡＭＥ ＮＯ． ：ＣＯＮＴ． ：ＣＯＮＴ．
ＵＳＢ ＭＯＤＥ ＵＳＢ ＭＯＤＥ
ＳＥＴ ＳＥＴ ＣＡＮＣＥＬ ＣＡＮＣＥＬ
3. Turn your camera off.
4. If you have one, plug the AC power adapter connector into
the "DC IN 5V" socket on the camera and then plug the
adapter itself into the main power outlet, otherwise be sure
your batteries are fresh and charged.
5. Use the USB cable (included) to connect the camera to your
PC.
DC IN 5V Camera
socket
(USB)
USB socket
socket
6. Turn the camera on.
Windows 98/98 SE/Me/2000 Professional
7.
FinePixViewer starts up automatically.
A.Install Software
A.Install Software
B.Connect a Camera to PC
B.Connect a Camera to PC
C.Save Images
C.Save Images
PC
Windows XP
q The "Found New Hardware" help message appears in
the bottom-right corner of your screen. This message will
close when the settings are completed. No action is
required.
w Specify the settings in the "AutoPlay" dialog box.
e Select "Viewing images using FinePixViewer" and then
select the "Always do the selected action" checkbox.
r Click the [OK] button to launch FinePixViewer.
C. Save Images
1. The Save Image Wizard starts up. Click the
2. Check that the files are downloaded from the camera to your
PC and that a folder with the date is created.
Ex. \My Documents \ My Pictures \ 2004_0723 Image
D. View Images
1. Click the [Show List of Images]
button.
2. Select "Preview" in the View menu to display an enlarged
image.
For more information
Refer to "How to use FinePixViewer" in the HELP menu, or chapter 5
and 6 in the Owner's Manual, or visit Fujifilm "Q&A Search" in the
following website.
( http://home.fujifilm.com/products/digital/ )
For Macintosh users, refer to chapter 5 and 6 in the Owner's Manual.
[ ]
NEXT button.