Advertisement
Viewing images on your PC
A. Install Software
Do not connect the camera to your PC until the software
installation is completed.
1. Turn on your PC and start up Windows.
●
!
Users of Windows 2000 Professional or Windows XP should log in
by using a system administrator account (e.g. "Administrator").
2. Quit all other active applications until no applications are
shown in the taskbar.
3. Load the enclosed CD-ROM into the CD-ROM drive. The
installer starts up automatically.
4. The Setup screen appears.
Click
the
[Installing
FinePixViewer] button.
5. After installation completed, press [Close] button.
B. Connect the Camera to your PC
1. Load an xD-Picture Card containing photographed images
into your camera.
w
2. Press the "
" button for about 1 second to turn the camera
on in Playback mode.
¶
ò
Select "
" DSC in "
menu (Refer to "USING THE SET-UP SCREEN" in the
owner's manual).
D S C
D S C
D S C
E N G L I S H
E N G L I S H
1
S E T
S E T
2
N T S C
N T S C
N T S C
N T S C
3
O K O K
3. Turn your camera off.
4. Plug the USB cable (mini-B) into the cradle USB socket.
5. Plug the AC power adapter connector into the "DC IN 5V"
socket on the cradle and then plug the AC power adapter into
the power outlet.
6. Turn your PC on.
7. Connect the PC to the cradle using the USB cable (mini-B).
A.Install Software
A.Install Software
B.Connect a Camera to PC
B.Connect a Camera to PC
C.Save Images
C.Save Images
˜
" USB MODE in the "
" SET-UP
PC
USB socket
8. Set the camera in the cradle.
Press the "POWER" button on the cradle to turn the power
on.
Windows 98/98 SE/Me/2000 Professional
9.
FinePixViewer starts up automatically.
Windows XP
The "Found New Hardware" help message appears in the
bottom-right corner of your screen. This message will close
when the settings are completed. No action is required.
FinePixViewer starts up automatically.
C. Save Images
1. The Save Image Wizard starts up. Click the
2. Check that the files are downloaded from the camera to your
PC and that a folder with the date is created.
Ex. \My Documents \ My Pictures \ 2005_0324
D. View Images
1. Click the [Show List of Images]
button.
2. Select "Preview" in the View menu to display an enlarged image.
For more information
Refer to "How to use FinePixViewer" in the HELP menu, or chapter 5
and 6 in the Owner's Manual, or visit Fujifilm "Q&A Search" in the
following website.
( http://home.fujifilm.com/products/digital/ )
For Macintosh users, refer to chapter 5 and 6 in the Owner's Manual.
[
]
Start
button.
Advertisement
