Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Ronix 2802
Summary of Contents for Ronix 2802
- Page 1 DEMOLITION HAMMER 2802...
-
Page 2: Technical Specification
TECHNICAL SPECIFICATION Model 2802 Power 1750W Voltage 220V Frequency 50Hz Impact Energy Max Impact Rate 1620 BPM Weight 25.5kg HEX 30x410mm Point chisel Accessories HEX 30x410mm Flat chisel Grease tube 100g - Wiping cloth PARTS LIST Anti-vibration Handle Tool Holder Lock... -
Page 3: General Power Tool Safety Warnings
SAFETY SYMBOLES In this operator’s manual / or machine’s labels following symbols are used: Read the manual carefully. Accordance with essential applicable safety of European directives. Double insulation. Wear ear and eye protection. Denote risk of personal injury, loss of life or damage to the tool in case of nonobservance of the instruction in this manual. -
Page 4: Work Area Safety
WORK AREA SAFETY a)Keep work area clean and well lit. Cluttered and dark areas invite accidents. b)Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes. c)Keep children and bystanders away while operating a power tool. - Page 5 inattention while operating power tools may result in serious personal injury. b) Use personal protective equipment. Always wear eye protection. Protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.
- Page 6 SERVICE a) Have your power tool serviced by a qualified repair person using only identical replacement parts in Ronix Service after sales centers. This will ensure that the safety of the power tool is maintained. ADDITIONAL SAFETY RULES FOR HAMMER 1.
- Page 7 Ronix Service authorized service center to check and repair. 15. Parts replace: Only original RONIX›s parts can be used to replace by authorized service center. 16. Right use accessories and parts: Don›t use other parts and accessories which not mentioned in the manual otherwise may cause injuries! 17.
- Page 8 before set up use of these products. 1. POWER SOURCE Ensure that the power source to be utilized conforms to the power requirements which specified on the name plate of the hammer. 2. POWER SWITCH Ensure that the power switch is in the position of OFF. If the plug is connected to power receptacle while the power switch is in ON position, the demolition hammer will start operation immediately, which can cause serious accident!
-
Page 9: Indicator Leds
Demolition hammer mechanical part is easy to get worn and lose impact energy if without enough lubrication, recommend filling grease and oil after 6 months usage. Grease and oil filling should be carried out by Ronix Service authorized service agent. USER MANUAL... -
Page 10: Maintenance And Inspection
The red service indicator LED lights up when the carbon brushes are worn out to indicate that the tool needs servicing. The power tool must then be sent to Ronix Service after-sales service agent. 6. CLEANING Clean the machine regularly with a soft cloth, preferably after each use. - Page 11 These kind of chemical materials are not allowed to use, water or soap are recommended! CAUTION: Repair, modification and inspection of RONIX Power tools must be must be carried out by a Ronix Service Authorized Service Center. In the operation and maintenance of power tools, the safety regulations and standards prescribed in each country must be observed.
Need help?
Do you have a question about the 2802 and is the answer not in the manual?
Questions and answers