Ronix 2816L Manual
  1. Manuals
  2. Brands
  3. Ronix Manuals
  4. Power Hammer
  5. 2816L
  6. Manual

Ronix 2816L Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
DEMOLITION HAMMER
2816L

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 2816L and is the answer not in the manual?

Questions and answers

Related Manuals for Ronix 2816L

Summary of Contents for Ronix 2816L

  • Page 1 DEMOLITION HAMMER 2816L...

  • Page 3: Specifications

    SPECIFICATIONS Rated voltage /frequency 220-240V~50/60HZ Rated power 1600W Strike per min 1500min-1 Impact energy Tool holder HEX30 PARTS LIST GENERAL POWER TOOL SAFETY WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.

  • Page 4: Work Area Safety

    (corded) power tool or battery-operated (cordless) power tool. WORK AREA SAFETY a) Keep work area clean and well lit. Cluttered or dark areas invite accidents. b) Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.

  • Page 5: Personal Safety

    use a residual current device (RCD) protected supply. Use of an RCD reduces the risk of electric shock. PERSONAL SAFETY a) Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication.
  • Page 6 POWER TOOL USE AND CARE a) Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed. b) Do not use the power tool if the switch does not turn it on and off.

  • Page 7: Safety Regulations

    SERVICE Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained. SAFETY REGULATIONS Please read the following instructions first before turning on power: 1) The working site shall be neat, operating field also requires a neat environment;...

  • Page 8: Operation And Maintenance

    7) Do not use in following area: it is prohibited to use in special circumstance of moist heat, snowy, explosive or corrosive gas area. 8) Correctly use the plug; do not exchange the plug arbitrarily; do not insert the plug that directly connected with the bare conductor into socket.

  • Page 9: Description Of Symbols

    9) Vibrations can injure the hand-arm system. Keep exposure to vibrations as short as possible. 10) Always lead the mains cable away backwards from the device. 11.Store the device where it is inaccessible to children. 12.When carrying out work, always hold the device with both hands and ensure that you have a stable standing position.

  • Page 10: Carrying Handle

    ASSEMBLY CARRYING HANDLE The carrying handle can be turned to any position. Loosen the hand wheel, turn the carrying handle around the machine axis to the desired position and tighten the inner hex bolt again. INSTALL BIT WARNING! Before any work on the machine itself, pull the mains plug out of socket.

  • Page 11: Switching On And Off

    SWITCHING ON AND OFF To start the machine, press the trigger, while pressing the lock on button,the machine will continuous working. For low temperatures, the machine reaches the full impact rate only after a certain time.This start-up time can be shortened by striking the chisel in the machine against the floor one time.To save energy, only switch the power tool on when using it.

  • Page 12: Maintenance

    SHARPENING CHISELS Good results are only achieved with sharp chisels; therefore, sharpen the chiselling tools in good time. This ensures a long service life of the tools and good working performance. RE-SHARPENING Sharpen chiselling tools using grinding wheels (e.g.Ceramic bonded corundum wheel) with a steady supply of water. Reference values are shown in the figure.
  • Page 13 RECYCLING Meaning of crossed - out wheeled dustbin: Do not dispose of electrical appliances as unsorted municipal waste, use separate collection facilities. Contact you local government for information regarding the collection systems available. If electrical appliances are disposed of in landfills or dumps, hazardous substances can leak into the groundwater and get into the food chain, damaging your health and well-being.

Table of Contents