Table of Contents
Advertisement
In the access point settings, select
mode
> WPA/WPA2.
Select
WLAN security
sett.. and from the following:
•
WPA mode
— Select
EAP
(Extensible Authentication
Protocol) or
Pre-shared key
(a secret key used for
device identification).
•
EAP plug-in settings
— If you selected
EAP, select which EAP plug-ins defined in your device
to use with the access point.
•
Pre-shared key
— If you selected
shared
key, enter the shared private key that
identifies your device to the wireless LAN to which
you connect.
•
TKIP encryption
— To enable TKIP encryption, based
on transient keys changed often enough to prevent
misuse, select Allowed.
All devices in the wireless LAN must either allow or
prevent the use of TKIP encryption.
The settings available for editing may vary.
EAP
EAP plug-ins
To view the EAP (extensible authentication protocol)
plug-ins currently installed in your device (network
service), select
Menu
Tools
>
>
EAP
plug-ins. Some Internet access points that use
wireless LAN as a data bearer and
WPA2
security mode use the plug-ins for
authentication.
EAP settings
Select
Menu
Tools
Settings
>
>
Access
points. Select
Options
>
select an access point and
Options
90
WLAN security
In the access point settings, select
mode
802.1x
>
Select
WLAN security sett.
Select
EAP plug-in settings
with a wireless LAN access point.
You can also select
WPA mode
>
settings or change the priority of the plug-in.
See the extended User's Guide on the Web and the
device help for more information.
WPA mode
Pre-
>
Configurations
To view and delete configurations for trusted servers,
select
Menu
>
Configs..
You can receive messages from your network operator,
service provider, or company information management
that contain configuration settings for trusted servers.
These settings are automatically saved in Configs.. You
may receive configuration settings for access points,
multimedia or e-mail services, and IM or
synchronization settings from trusted servers.
To delete configurations for a trusted server, scroll to
Settings
Security
>
>
the server, and press the clear key. The configuration
settings for other applications provided by this server
802.1x
or
WPA/
are also deleted.
Date and time settings
Connection
>
>
See "Clock settings," p. 95.
New access
point, or
> Edit.
WLAN security
or
WLAN security mode
> WPA/WPA2.
WPA mode
> EAP.
>
and the EAP plug-ins to use
Options
and view the plug-in
Tools
Settings
Connection
>
>
>
Advertisement
Table of Contents
