Table of Contents
Advertisement
Important: Do not remove the MMC card in
the middle of an operation when the card is being
accessed. Removing the card in the middle of an
operation may damage the memory card as well as
the device, and data stored on the card may be
corrupted.
Charge the battery
1. Connect the charger to a wall outlet.
2. Connect the power cord to the bottom of the device.
The battery indicator bar starts scrolling on the
display. If the battery is completely discharged, it
may take a few minutes before the charging
indicator is shown. The device can be used while
charging.
3. When the battery is fully charged, the bar stops
scrolling. Disconnect the charger from the device,
then from the outlet.
Switch on your device
1. To switch the device on, press the power key.
2. If the device asks for a PIN code, lock code or security
code, enter the code, and select OK.
3. To switch the device off, press the power key.
Tip: When you switch the device on, it may
recognize the SIM card provider and configure
the correct text message, multimedia message,
and GPRS settings automatically. If not, contact
your service provider for the correct settings.
The device can be used without the phone functions
when a SIM card is not inserted or when the
profile is selected.
The picture shows the location of the power key.
Enter basic settings
When you power on the device for the first time, and
when you power on the device after the battery has
been empty or removed for a longer period of time,
your device asks for home city, time, and date. You can
change the settings later.
1. Select your home city from the list and OK. To
browse for a city, start to type the name of the city,
or scroll to a city. It is important to select the correct
city, because scheduled calendar entries that you
create can change when the home city is changed.
2. Set the time, and select OK.
3. Set the date, and select OK.
Offline
11
Advertisement
Table of Contents
