Table of Contents
Advertisement
The settings available for editing may vary. Some
settings may be preset by your service provider.
If you try to edit mailbox settings but have not set up
an e-mail account, the mailbox guide opens and helps
you set up your e-mail account.
Settings for the e-mail that you receive
Select
Incoming
e-mail, and define the following:
•
User name
— Enter the user name for the e-mail
service.
•
Password
— Enter the password for the e-mail
service.
•
Incoming mail serv.
— Enter the IP address or host
name of the server that receives your e-mail.
•
Access point in use
— Select the Internet access
point that the device uses for retrieving the e-mail
messages that you receive.
•
Mailbox name
— Enter a name for the mailbox.
•
Mailbox type
— Select the mailbox protocol that
your remote mailbox service provider recommends.
The options are
POP3
and IMAP4. This setting can be
selected only once and cannot be changed if you
have saved or exited from the mailbox settings. If
you use the POP3 protocol, e-mail messages are not
updated automatically when you are online. To see
the latest e-mail messages, you must disconnect and
make a new connection to your mailbox.
•
Security (ports)
— Select the security option used to
secure the connection to the remote mailbox.
•
Port
— Define a port for connection.
•
APOP secure login
(for POP3 only) — Use with the
POP3 protocol to encrypt the sending of passwords
to the remote e-mail server while connecting to the
mailbox.
46
Settings for the e-mail that you send
Select
Outgoing
e-mail, and define the following:
•
My e-mail address
— Enter the e-mail address given
to you by your service provider. Replies to your
messages are sent to this address.
•
User name
— Enter the user name for the e-mail
service.
•
Password
— Enter the password for the e-mail
service.
•
Outgoing mail serv.
— Enter the IP address or host
name of the mail server that sends your e-mail. You
may only be able to use the outgoing server of your
network operator. Contact your service provider for
more information.
•
Access point in use
— Select the Internet access
point that the device uses for sending the e-mail
messages that you send.
•
Security (ports)
— Select the security option used to
secure the connection to the remote mailbox.
•
Port
— Define a port for connection.
User settings
Select
User
settings, and define the following:
•
My name
— Enter a name to appear before your e-
mail address when you send e-mail.
•
Send message
— Select to send the e-mail as soon
as possible, to send it the next time you retrieve e-
mail, or to store the e-mail in the Outbox, from where
you can send it later.
•
IMAP4 folder path
— Enter the path to the IMAP4
inbox location in case the server cannot open it
automatically. Normally you do not need to define
Advertisement
Table of Contents
