Advertisement
1. Before beginning setup, please make sure you know the NAME and PASSWORD of
the network you are attempting to connect to
2. Make sure your device is plugged in and powered on.
3. Hit the home button on the face of the device, bringing up the main menu.
4. Use the selector wheel to scroll clockwise until you illuminate the settings icon on
the right hand side of the main menu.
5. Press the selector wheel to select the settings option.
Patient Instructions
CONNECTING YOUR LUNA G3 WITH WI-FI MODULE
6. Once in the setting option scroll down to the Wi-Fi settings by turning the selector
wheel counter-clockwise until you see an icon labeled Wi-Fi.
7. Press the selector wheel once the Wi-Fi icon is illuminated.
8. If the device is currently not connected to a network, press the selector wheel
and scroll clockwise until you encounter the name of the network you are trying
to connect to. You will need to know the name of the network you are trying to
connect to in order to connect this device.'
Advertisement
Table of Contents
Related Manuals for 3B Medical LUNA G3
Summary of Contents for 3B Medical LUNA G3
- Page 1 Patient Instructions CONNECTING YOUR LUNA G3 WITH WI-FI MODULE 1. Before beginning setup, please make sure you know the NAME and PASSWORD of the network you are attempting to connect to 2. Make sure your device is plugged in and powered on.
- Page 2 9. Type in your network passcode by using the connector wheel to scroll in between 10. A prompt will show on the screen that your device is currently trying to connect to letters and numbers. Once finished scroll to the enter option at the bottom right of your selected Network.
Need help?
Do you have a question about the LUNA G3 and is the answer not in the manual?
Questions and answers