Dolby Atmos - Philips Fidelio B97/98 User Manual

Surround mode (SURR)
Repeatedly press
press the left and right navigation buttons to
select surround mode options.
• UPMX: Up-mixing mode for driving output
to all speakers even when content with
audio channels lesser than the 5.1.2 (B95)
or 7.1.2 (B97) speaker con guration. Up-
mixing technology from Dolby or DTS is
applied according to content type.
• STD: Standard mode for delivering original
sound. The speaker outputs will follow
the audio channels in content. (Note: If
the audio content is 2.0 channel, only
the left & right channel speakers and the
subwoofer will output sound. Use UPMIX if
virtual surround is desired.)
• A-I: The media intelligence function of
Dolby Atmos for home audio is utilized to
drive the vocal enhancement or surround
e ects.
Dynamic Range Control (DRC)
You can apply dynamic range control to
Dolby or DTS bitstreams.
Repeatedly press
press the left and right navigation buttons to
turn DRC on, o or auto.
Note
•
DRC is not available in BT/AUDIO IN/Play-Fi
mode.
Dialogue Control (DLG CTRL)
Dialogue mode improves the clarity of
dialogue and vocals in movies, TV programs
and podcasts by adjusting the tonal balance
of this product.
Repeatedly press
then press the left and right navigation
buttons to adjust dialogue level.
This control is supported in DTS:X stream
only.
15 EN
to select SURR, then
to select DRC, then
to select DLG CTRL,
Synchronize video and sound
(SYNC)
If the audio and video are not synchronized,
delay the audio to match the video.
Repeatedly press
press the left and right navigation buttons to
synchronize the audio with the video.

Dolby Atmos

In addition to horizontal distribution of
5-channel audio, this product also has
built-in Dolby Atmos enabled speakers
as additional audio channels to generate
overhead distribution of audio for powerful
delivery of 3D sound immersion and greater
reality.
2.8~3m
0.7~0.8m
Optimal setup for Dolby Atmos sound
• Place this product at a height of
0.7m-0.8m.
• Ceiling height is 2.8m-3m.
• Listening distance from this product is 2m-
3m.
• Ceiling is not made of sound absorbent
material.
• Preferably no protrusive objects (such as
lighting and decorations) are on the ceiling.
Dolby Atmos is available only in HDMI
®
mode. For the details of the connection,
please refer to "Connect to TV". Best Dolby
Atmos e ects may be achieved through the
following two use cases.
to select SYNC, then
®