Table of Contents
Advertisement
Manual pairing
If no audio from the subwoofer can be heard,
manually pair up the subwoofer.
1
Unplug both the main unit and the
subwoofer from the mains sockets, then
plug them in again after 3 minutes.
Press and hold the CONNECT (Connect)
2
button on the rear of the subwoofer for
5 seconds.
3
Press and hold
remote control for 5 seconds to switch
the main unit to Eco standby.
4
Press
on the main unit or remote
control to switch the main unit on.
»
The indicator on the subwoofer blinks
white quickly and SBW PAIRING
displays on the display panel.
»
If the pairing succeeds, the indicator
on the subwoofer lights up white and
SBW PAIRED displays on the display
panel.
If the pairing fails, CHK SBW displays
5
on the display panel. Repeat the steps
above.
Note
•
The subwoofer should be within 6 meters
from the main unit in an open area (the
closer the better).
•
Remove any obstacles between the
subwoofer and the main unit.
•
If the wireless connection fails again, check if
there is a con ict or strong interference (e.g.
interference from an electronic device) around
the location. Remove them and try again.
•
If the wireless dis-connection or pairing lasts
for 1 minute, the subwoofer automatically
switches to standby and the LED on the
subwoofer turns o .
Pair up with detachable
wireless surround
speakers
The detachable wireless surround speakers
automatically pair up with the main unit for
11
EN
on the main unit or
wireless connection when you turn on the
main unit and the wireless speakers.
Manual pairing
If no audio from the detachable wireless
surround speakers can be heard, manually
pair up the wireless speakers.
1
Turn on the main unit and the wireless
speakers.
»
If the connection to the main unit is lost,
the LED on the wireless speaker blinks
red.
2
Dock the wireless left and right
speakers into the main unit to pair up
automatically.
If the pairing succeeds, SL PAIRED
»
(surround left speaker) and SR
PAIRED (surround right speaker)
display on the display panel.
3
If the pairing fails, re-dock the wireless
speakers into the main unit.
Charge the detachable
wireless surround
speakers
If the wireless surround left/right speaker is
undocked from the main unit, its battery level
is indicated by the LED on the speaker.
• Light up white: full battery or more than
20% capacity remaining
• Flash red: low battery level, less than 20%
capacity remaining
• Flash red and turn o : near empty, less
than 10% capacity remaining
Advertisement
Table of Contents
