Contents Chromecast(audio) / AirPlay2 Important / Alexa 3PDA Safety Listen to Spotify Care for your product Care of the environment Compliance 5 Settings Help and support Adjust speaker level Set display brightness Auto standby 2 Your product Apply factory settings What’s in the box Main unit Remote control...
1 Important Risk of injury or damage to this product! • For wall mounting, this product must be securely attached to the wall in accordance with the installation instructions. Use only the supplied wall mount bracket (if Read and understand all instructions before available).
Use only micro ber cloth to clean the requirements and other relevant provisions product. of Directive 2014/53/EU. You can nd the Declaration of Conformity on www.p4c.philips. com. Care of the environment Help and support Disposal of your old product and battery For extensive online support, visit www.philips.com/support to:...
Congratulations on your purchase, and This section includes an overview of the main unit. of product software upgrade), register your product at www.philips.com/support . What’s in the box Check and identify the items in the package: • Soundbar x1 ①...
• OPTICAL: Switch your audio source to CUSTOM User custom EQ (controlled the optical connection. in Philips Sound app) • AUDIO IN: Switch your audio source to AUDIO IN connection (3.5mm jack). Select a height e ect level for Dolby •...
• Lights up red when the wireless (Sound) Select sound settings (Surround/DRC/ speaker is being charged (only for the IMAX/Dialogue/Bass/Treble/Sync). wireless speakers docked into the main unit). Surround sound options Dynamic Range control USB-C charging port IMAX IMAX mode options Connect to external USB-C power adapter Adjust dialogue level (for (not provided) for longer detachable use..
Connectors This section includes an overview of the connectors available on the main unit. DC IN Connect to the power supply. AUDIO IN Connect to an audio output (3.5mm jack) on a device. OPTICAL IN Connect to an optical audio output on the TV or a digital device.
3 Connect and Note set up Surround sound depends on factors such as room shape and size, type of wall and ceiling, windows and re ective surfaces, and speaker acoustics. Experiment with the speaker positions to nd the optimum setting for you. This section helps you connect this product to a TV and other devices, and then set it up.
Repeatedly press the source button until Connect to TV E-ARC displays on the display panel. Connect this product to your TV. You can Note enjoy audio from TV programs through the • Your TV must support the HDMI-CEC and soundbar speaker. Use the best quality ARC function and you must enable them.
Using an analog cable, connect the Connect audio from TV or AUDIO IN connector on this product to other devices the AUDIO OUT connector or analog audio output connectors (red and white) on TV or other devices. Play audio from TV or other devices through Repeatedly press the source button until this product.
wireless connection when you turn on the Manual pairing main unit and the wireless speakers. If no audio from the subwoofer can be heard, manually pair up the subwoofer. Manual pairing Unplug both the main unit and the If no audio from the detachable wireless subwoofer from the mains sockets, then surround speakers can be heard, manually plug them in again after 3 minutes.
Return to Philips phones, etc.) to the same Wi-Fi network, you device in the Wi-Fi Sound app to can then use the Philips Sound app powered setup. continue the setup. by DTS Play-Fi to control the soundbar to listen to audio les.
Page 14
(WPS), you can set up the connection home network [Play-Fi device (xxxxxx)]. without entering a password. Launch the Philips Sound app powered by DTS Play-Fi. Follow the instructions Press and hold the Wi-Fi button for 4 in the app to connect this product to seconds.
2 AAA batteries (1.5V) with • CUSTOM: Customize the sound based correct polarity, then slide the battery on your preferences (controlled in Philips compartment cover back into position. Sound app: Settings > Fine Tune). Bass/Treble levels adjustment Change the low frequency (bass) and high frequency (treble) settings of this product.
Surround mode (SURR) Synchronize video and sound (SYNC) to select SURR, then Repeatedly press press the left and right navigation buttons to If the audio and video are not synchronized, select surround mode options. delay the audio to match the video. •...
From your Blu-ray disc player: Play audio through • Movie with Dolby Atmos. Bluetooth • Your Blu-ray disc player is connected to this product via HDMI IN 1/2 connector. • On your Blu-ray disc player, enable Through Bluetooth, connect this product with bitstream/raw audio format for HDMI your Bluetooth device (such as an iPhone, sound output.
5 Settings Apply factory settings In case of no response from this product, you can reset this product to the default settings programmed at the factory. Adjust speaker level Power on, press and hold VOL +/- buttons on the main unit simultaneously Repeatedly press to enter the settings for 8 seconds until RESET displays on the...
Play-Fi system • The upgrade time may take around 8 This part can be updated directly by Philips minutes. Sound app. Once the product is connected with the app, It will check and prompt for update if a newer version software is Check if there is the latest software available.
7 Wall mount 3.5-4mm/0.14”-0.16” 3.5-4mm/0.14”-0.16” your product 4mm/ 4mm/ 0.16” 0.16” Before you mount your product on the wall, >25mm/0.98” >25mm/0.98” read all safety precautions. (see ‘Safety’) " / 2 . 0 / 2 . 0 " ~ 5 0 ~ 5 0 .
• Play-Fi: MPEG4 AAC, MPEG4 M4A, MP3, 2.4G: 17.6dBm; WiFi 5G: 16.38dBm; WiFi WAV, FLAC, AIFF 5.8G: 8.07dBm Main unit • Power supply: Model (Philips branded AC power adapter): NSA120EC-19063200 • Input: 100-240 V~, 50/60 Hz, 2.0 A • Output: 19 V 6.32 A •...
If you still have a problem, another Bluetooth device. Disconnect the get support at connected device, then try again. www.philips.com/support Quality of audio play from a connected Bluetooth device is poor. Main unit • The Bluetooth reception is poor. Move the The buttons on the main unit do not work.
Page 24
• Certain network service or contents available through the device may not be accessible in case the service provider terminates its To control this AirPlay 2–enabled speaker, service. iOS 11.4 or later is required. Use of the Works with Apple badge means that an accessory has been designed to work speci cally with the technology identi ed Dolby, Dolby Vision, Dolby Atmos, and the...