SAFETY INFORMATION ffll INDE X SAFETV INFORM,,\TION ........... _ ....................3 Far your safety and correct operation of the appliance, read this manual CHARACTERI STICS ................................INSTALLATION ...................... --.............. 7 carefully before installation and use.
Page 3
• lf the extractor is used in conjunction with non-elecfric. a l:appliances • The appliance is not to be used by persons (including, childre@} with (e.g. gas burning appliances), suffìcient degree of aeration must be - reduced physìcal, sensory or mental capabilities, or lack of experience guaranteed in the room in arder to prevent the backf!o\'.11 of ex�aust _ gas.
The hood support surface must be 135 mm above the bottom surface ofthe·wall units. • Drill the support with a 0 4,5 mm drill bit, using the drilling template provided. • Gut a hole 0 150 mm in size on the support surface; using the drilling template provided.
in any shelf that may be p o si- • Cut a hole 0 125 · · · · · tioned over the hood. Insert the reducer flange 9 on the hood body outlet. • Connect the flange to the outlet on the shelf over. the hood by using a flexible or rigid pipe 0120 mm.
If a larnp fails to function at any time, open the metal grille pane! and check that the larnp is fully screwed into the holder. When changing the larnp, an identica! replacement must be fitted • Tue filters must be cleaned every 2 months, or more fte to ensure a safe working ofthe hood.
Need help?
Do you have a question about the K60 TELXA and is the answer not in the manual?
Questions and answers