Download Print this page

Safety Information - Bertazzoni K60 TELXA Lnstruction Manual

Advertisement

INDE X
SAFETV INFORM,,\TION ......................... ......................... . _ ........................ ......................... ........................ ......................... . 3
CHARACTERI STICS
......................... ......................... ........................ ........................ ........................ ........................ ...........
INSTALLATION ......................... ......................... ........................ ......................... ... --....................... ......................... .............. 7
USE
....................... ........................ ...............
·
....................... ..... . . ....................... ....................... ....................... ..................
CARE ANO CLEANING
......................... ... ........................ ........................ ................ .

SAFETY INFORMATION

ffll
0
Far your safety and correct operation of the appliance, read this manual
6
carefully before installation and use. Always keep these instructions
9
with the appliance even if you move or sell it. Users must fully know the
.•..
1 O
operation and safety f eatures of the appliance.
A.
The wire connettion has to be done by specialized technician.
• The manufacturer will not be held liable far any damages resulting from
incorrect or improper installation.
• The minimum safety distance between the cooker top and the extractor
hood is 650 mm (some models can be installed at a lower height,
please refer to the paragraphs on working dimensions and installation).
• lf the instructions far installation far the gas hob specify a greater
distance, this must be respected.
• Check that the mains voltage corresponds to that indicated on the
rating plate fixed to the inside of the hood.
• Means far disconnection must be incorporated in the fixed wiring in
actordance wi!h the wiring rules.
• Far Class I appliances, check that the domestic power supply
guarantees adequate earthing.
• Connect the extractor to the exhaust flue through a pipe of minimum
diameter 120 mm. The route of the flue must be as short as possible.
• Reglilations conceming the discharge of air have to be fulfilled.
• Do not connect the extractor hood to exhaust ducts carrying
combustion fumes (boilers, fireplaces, etc.).
m

Advertisement

loading

This manual is also suitable for:

K90 telxa