Husqvarna QRT4281W User Manual page 16

16 www.husqvarna-electrolux.se
2. Take out the filter from the plastic
bag.
3. Insert the filter in the slot in the rear
wall of the appliance.
4. Put on the filter cover.
CAUTION!
Make sure that the filter
cover is always closed so
that the filter functions
correctly.
To get the best performance the filter
should be changed once every 6 months.
New active filter can be purchased from
your local dealer or through the website.
The part number is printed on the plastic
bag.
7.6 Replacing UltraFresh filter
UltraFresh filter is already installed in
the plastic frame of the bottom pull-out
drawer at the time of purchase of the
appliance.
Well-handled filter should function until
the end of the appliance life cycle. To
clean normally soiled filter remove it from
the appliance and rinse it gently with tap
water.
Replace UltraFresh filter only if
necessary e.g. when it is damaged or
soiled with oil or grease. New filter can
be purchased from your local dealer or
through the website.
To replace UltraFresh filter:
1. Open the bottom pull-out drawer in
the fridge compartment.
2. Remove the assembled filter by
sliding it as indicated in the picture.
3. Throw away the old filter and replace
it with the new one.
7.7 Replacing UltraFresh+
filter
UltraFresh+ filter is in the plastic bag at
the time of purchase of the appliance.
Take out the filter from the bag and insert
it inside the filter holder (installation of
the filter is similar to its replacement
process described below).
Replace UltraFresh+ every second year.
New filter can be purchased from your
local dealer or through the website.
To replace UltraFresh+ filter:
1. Open the bottom pull-out drawer in
the fridge compartment.
2. Pull down the flap of the filter holder
hooked under the glass cover of the
pull-out drawer to open it.