Service Procedures - 3M C1060 Manual

Model C1060 Headset Intercom System

Service Procedures

Replacing the Ear Cup, the Ear Pad,
or the Headband Pad
Tools Required:
None
Procedures:
Ear Cup and Ear Pad Replacement:
1. Twist and pull the Ear Cup and Ear Pad
together free of the speaker on the Inner Case.
2. Separate the Ear Pad from the Ear Cup.
Replace Ear Pad and/or Ear Cup with a new
one and reassemble.
3. Twist and press into place over speaker.
©3M 2005 November
Replacement Parts and Service
Headband Pad Replacement:
1. Peel the Headband Pad away from the Battery
Holder Cover. Clean off any adhesive residue.
2. Remove the protective backing from a new
Headband Pad, align and press into place.
Ear Cup
Headset Speaker
Headband Pad
Ear Pad
8