Installation Instructions - 3M C1060 Manual

Installation Instructions

Cross-Lane System
78-6911-4396-6
Description
The Cross-Lane System is designed for facilities that have two menu signs. It consists of two system C960 base
stations that are connected to a Cross–Lane Module. A Cross–Lane Module is a five–pole switch that allows the
two systems to be separated during hours of peak activity. The Cross-Lane System can be used with C760,
C860, C960, and C1060 headsets. The C760 headset may require additional equipment.
A Cross–Lane Module can be useful if the manager wishes to operate each lane with a separate crew
during periods of peak activity. This is accomplished by turning the Cross–Lane switch OFF. By
pressing the T1 button on any headset, the operator can communicate with a customer at menu sign 1.
By pressing the T2 button on any headset, another operator can communicate with a customer at menu
sign 2. When the Cross–Lane Module is OFF, the operator will only hear the vehicle detector alert
from the menu sign with which he or she last talked.
During periods of lower activity, the Cross–Lane Module is turned ON, allowing one headset order–taker to
operate both lanes. When the Cross–Lane Module is turned ON, the operator will always hear vehicle detector
alerts from both menu signs. A single alert indicates a vehicle is a menu sign 1, while a double alert indicates a
vehicle is at menu sign 2.
Additional Material Required
•
A sufficient length of two-conductor 20 AWG twisted pair shielded audio cable (not supplied) for
connecting the Cross-Lane Module to the two base stations.
•
Applicable screws/fasteners (not supplied) for mounting the Cross-Lane Module.
Installation
Wiring the System:
1. Use the applicable screws/fasteners and mount the Cross-Lane Module to the wall in a convenient location
next to one of the base stations.
To ensure access to the switch on the Cross-Lane Module, locate the module near one
of the base stations.
2. Run a length of two-conductor 20 AWG twisted pair shielded audio cable between the Cross-Lane Module
and the nearest base station.
Note
3 of 6