Table of Contents
Advertisement
Special Instructions for System Manager
Changing Channels
if Interference is
Heard
16
The C960SL system is capable of operating on any one of eight different channels.
If messages etc. from a different transmitter are heard in the compact earset or
monitor speaker, or if you are told that your store's messages are being heard
elsewhere, interference is occurring. You can correct either type of interference
by changing the base station operating channel. To do this:
1. Pull outward on the right side of the base station half-cover and then lift and
remove the cover. See Figure 14.
2. With the base station turned on, press and release the Channel Select switch
once. (This advances the system to the next channel.) One of the red
indicators (1-8) will light, indicating the newly selected channel.
When two systems are used in a cross-lane application, both base stations
must be set to the same channel, but different lane settings
Figure 14.
Figure 15.
Note
Model C960SL
.
3M 2003
Advertisement
Table of Contents
