RemovingTheBuilt-InRechargeableBattery - Panasonic ER‑PA10 Operating Instructions Manual

Cleaningtheblade
1.Brushoff 2.Removethe
anyhairs bladeand
fromthe brushoff
clipperand thehairs
fromaround fromthe
theblade. bladeedge.
Lubrication
1.Applyadropoftheoilto
eachindicatedpoint.
• Apply the oil to the clipper
before and after each
use.
2.Remountthebladeon
theclipper.
 Replacementparts 
Replacement part is available at your dealer or Service Center.
Replacement parts for ER‑PA10 Blade
ER-PA10_ASIA.indb 5
3.Brushthehairsoutfrom
betweenthestationary
bladeandthemoving
bladewhilepressing
downonthecleaning
levertoraisethemoving
blade.
WER‑9P30
Removingthebuilt‑inrechargeablebattery
Removethebuilt‑inrechargeablebatterybeforedisposingof
theclipper.
Please make sure that the battery is disposed of at an officially
designated location if there is one.
This figure must only be used when disposing of the clipper, and
must not be used to repair it. If you dismantle the clipper yourself,
it may cause malfunction.
• Remove the clipper from the AC adaptor when removing the
battery.
• Slide the power switch to turn on the power and then keep the
power on until the battery is completely discharged.
• Perform steps 1 to 6 and lift the battery, and then remove it.
• Please take care not to short‑circuit the battery.
Forenvironmentalprotectionandrecyclingofmaterials
This clipper contains a Nickel‑Metal Hydride battery.
Please make sure that the battery is disposed of at an officially
assigned location, if there is one in your country.






5
2013/06/13 20:53:10