Removing The Built-In Rechargeable Battery; Specifications - Panasonic ER‑GP21 Operating Instructions Manual

Removing the built-in rechargeable
battery
Remove the built-in rechargeable battery before
disposing the clipper.
The battery is to be disposed of safely.
Please make sure that the battery is disposed of at an
officially designated location if there is one.
This figure must only be used when disposing the
clipper, and must not be used to repair it. If you
dismantle the clipper yourself, it may cause malfunction.
• Remove the clipper from the AC adaptor.
• Slide the power switch to turn on the power and then keep
the power on until the battery is completely discharged.
• Perform steps 1 to 8 and lift the battery, and then
remove it.
• Take care not to short circuit the positive and negative
terminals of the removed battery, and insulate the
terminals by applying tape to them.








For environmental protection and recycling of materials
This clipper contains a Nickel‑Metal Hydride battery.
Please make sure that the battery is disposed of at an
officially assigned location, if there is one in your country.

Specifications

Power source See the name plate on the AC adaptor.
Motor voltage
1.2 V
Charging time Approx. 8 hours
11