Table of Contents
Advertisement
List of Functions
"Extended" Menu
Sub-menu
Display
This lets you make settings related to the projector's display.
Message:
Sets whether the input source name or colour mode name or a message is displayed on the screen ("On") or not displayed ("Off") at times such
as when the input source or colour mode is changed or when no image signals are being input.
Display Background:
Sets the screen status when no image signals are being input to "Black", "Blue" or "Logo".
Startup Screen:
The startup screen (the image projected when starting the projector) is displayed when starting (On)/ or not displayed when starting (Off). The
setting is enabled after turning the power supply off and then back on.
A/V Mute:
You can choose the screen display in A/V mute when the "A/V Mute" button is pressed from "Black", "Blue", and "Logo".
Projection
Sets the projection position for the projector.
"Front" "Front / Ceiling" "Rear" "Rear / Ceiling"
By holding down the [A/V Mute] button for about 5 seconds, you can change the projection setup in the following ways.
Front
Front Ceiling
Rear
Rear Ceiling
Function
sp.55
36
Advertisement
Table of Contents
