Huawei EchoLife HG8245Q Quick Start Manual page 10

Table 2 Indicator status description 2
Status
No.
PON
1 Off
Blinks twice
2
a second
3 Steady on
4 Off
Blinks twice
5
a second
Blinks twice
6
a second
Blinks once
7
two seconds
FAQs
The LOS indicator blinks.
If the LOS indicator blinks once two seconds, check whether the
„
pigtail fiber is properly connected and the connector is clean.
If the GPON terminal blinks twice a second, contact the service
„
provider for help.
The PON indicator is off.
Check whether the OPTICAL port and optical fiber is properly
„
connected.
The GPON terminal fails to register with the
„
Contact the service provider for help.
How to reset the GPON terminal?
Press RESET by using a needle-type object.
„
How can I restore factory defaults?
Press RESET by using a needle-type object for longer than 10s
„
to restore factory defaults and reset the GPON terminal. If the
indicator is off and then is lit, the system restarts successfully.
Status
LOS
Off
Off
Off
Blinks once
two seconds
Blinks twice
a second
Blinks once
two seconds
Blinks once
two seconds
Description
The GPON terminal is prohibited by the upper-
layer device, contact the service provider for
help.
The GPON terminal attempts to set up a
connection with its upper-layer device.
A connection is set up between the GPON
terminal and its upper-layer device.
The GPON terminal is not connected to optical
fibers or does not receive optical signals.
The GPON terminal is a rogue terminal,
contact the service provider for help.
The Rx optical power of the GPON terminal
does not within the range (–27 dBm to –8
dBm) of the Rx sensitivity.
The hardware is faulty.
upper-layer device
9
.