Dahua NVR4204-P-4KS2 User Manual page 324

Parameter Function

Select Preset from the dropdown list.
Preset

Turn the camera to the corresponding position and Input the
preset value. Click Add button to add a preset.

Select Tour from the dropdown list.
Tour

Input preset value in the column. Click Add preset button, you
have added one preset in the tour.

Repeat the above procedures you can add more presets in one
tour.

Or you can click delete preset button to remove one preset from
the tour.

Select Pattern from the dropdown list.
Pattern

You can input pattern value and then click Start button to begin
PTZ movement such as zoom, focus, iris, direction and etc. Then
you can click Add button to set one pattern.

Please input the corresponding aux value here.
Aux

You can select one option and then click AUX on or AUX off
button.
You can turn on or turn off the light/wiper.
Light and
wiper
3D Intelligent Positioning
Key
You can click this icon to
display or hide the PTZ
control platform.
Figure 5-12
309