Add User - Dahua NVR4204-P-4KS2 User Manual

4.17.4.1.1 Add User

Click modify user button
Please input the user name, password, select the group it belongs to from the dropdown list.
Then you can check the corresponding rights for current user.
For convenient user management, usually we recommend the general user right is lower than the admin
account.

Username: admin. Password: admin. (administrator, local and network)

Username: 888888. Password: 888888. (administrator, local only)
 Username: default. Password: default (hidden user). Hidden user "default" is for system interior use
only and can not be deleted. When there is no login user, hidden user "default" automatically login.
You can set some rights such as monitor for this user so that you can view some channels without
login.
When you create a new user, you can input the corresponding MAC address of current user. If you leave
this item in blank, any MAC address user can share this user account to login. Please note system needs
to check the validity of MAC. Only the 12-digit 0-f format address can pass the validity verification.
System only saves small character even you input capitalized one. You can see the corresponding
prompt if there is any illegal input.
Click the Set button after the period, you can set valid period to use current account. See Figure 4-175.
in Figure 4-173 , the interface is shown as in Figure 4-174.
Figure 4-174
294