Nvr11/11-P/41/41-P/41-8P/41-W/21-S2/21-P-S2/21-8P-S2/41-4Ks2/41-P-4Ks2/41; 4Ks2 Series - Dahua NVR4204-P-4KS2 User Manual

When you remove the HDD, please refer to the following figure to pull the spring up and then remove the
HDD.

3.3.2 NVR11/11-P/41/41-P/41-8P/41-W/21-S2/21-P-S2/21-8P-S2/41-4KS2/41-P-4KS2/41

-8P-4KS2 Series
○
1
. Loosen the screws of the upper
cover and side panel.
○
4
Turn the device upside down and
then turn the screws in firmly.
horizontally
. After the HDD is in
the proper position, the columns
on the two sides can lock the
screw holes of the HDD to secure
it.
○
2
Fix four screws in the HDD
(Turn just three rounds).
○
5
Fix the HDD firmly.
○
3
Place the HDD
accordance with the four holes in
the bottom.
○
6
Connect the HDD cable and
power cable.
in
134