Pioneer DEH-S5200BT Operation Manual page 50

Making a connection with Pioneer Smart Sync
Pioneer Smart Sync is the application that intelligently brings
your maps, messages, and music together in the vehicle.
Download Now
I
Pioneer Smart Sync
I P I
AwARNING - - - - - - - - - - - - - - - - - - - - - - - .
Do not attempt to operate the application while driving. Make sure
to pull off the road and park your vehicle in a safe location before
attempting to use the controls on the application.
1
Enter the SYSTEM menu (refer to "About the main menu").
2
Turn the
M.C.
dial to select [APP CONTROL], then press to confirm.
3
Turn the
M.C.
dial to select one of the below.
• Select [WIRED] for the USB connection.
• Select [BLUETOOTH] for the Bluetooth connection.
4
Turn the
M.C.
dial to select [AUTO APP CONN], then press to confirm.
5
Turn the
M.C.
dial to select [ON], then press to confirm.
6
Connect this unit with the mobile device via USB or Bluetooth.
Pioneer Smart Sync on the iPhone/Android device starts
automatically.
NOTE
Regardless of whether the [AUTO APP CONN) setting is set to [ON) or [OFF). you can also
perform the following to start Pioneer Smart Sync.
- For devices other than the USB-connected Android device, press SRC/ OFF to select any
source and press and hold the
M.C.
dial.
- For iPhone, launch Pioneer Smart Sync on the mobile device.
Listening to Pandora®
(Not available when [USB MTPJ is set to [ON) in the SYSTEM settings.)
Update the firmware of the Pandora application to the latest version before use.
Before you start, connect this unit with the mobile device via USB (iPhone only) or Bluetooth.
1
Enter the SYSTEM menu (refer to "About the main menu").
2
Turn the
M.C.
dial to select [APP CONTROL], then press to confirm.
3
Turn the
M.C.
dial to select one of the below.
• Select [WIRED] for the USB connection.
• Select [BLUETOOTH] for the Bluetooth connection.
4
Press SRC/OFF to select [PANDORA].
5
Launch the Pandora application on the mobile device and start
playback.