Table of Contents
Advertisement
Interior parts installation
1.
Insert the Flavor Grid into the bottom
of the grill with the ridges facing up by
angling it down and in. Be sure the middle
sections solid area is covering the front
ignitor. (See Fig. 12)
2.
Install cooking grates on the ledges provided
on the grill to create your cooking surface.
(See Fig. 13)
3.
Place warming shelf on support brackets by
setting it flat across brackets allowing the two
holes to line up with the stops on each
bracket. (See Fig. 14)
Drip Pan Installation
1.
The drip pan is located under the grill head.
Slide Drip Tray in from the rear of the grill
and cart, fitting the ledges on the two rails that
are located on the bottom of the grill.
(See Fig. 15)
Grill Assembly
7
Solid area
over ignitor
Slide onto rails
under grill
Fig. 12
Fig. 13
Fig. 14
Rear of
Grill
Fig. 15
Advertisement
Table of Contents
