Important Instructions - Newmac CL 86C Installation, Operating And Service Manual

1. An emergency power switch is required to be installed in a convenient location at a safe distance from the
burner. This switch interrupts the electrical supply circuit to the appliance. Make sure you are aware of its
location and the off position is clearly marked.
2. Keep the space clear around the appliance within the specified clearances to combustibles.
3. Ensure the supply of combustion air to the appliance is not obstructed or cut-off.
4. Maintain proper ventilation of the appliance area.
5. Maintain free air flow through the return air registers. *
6. Contact service personnel before remodeling.
7. Contact service personnel for annual service and maintenance.
8. Contact service personnel for air filter replacement. *
9. Contact service personnel before and after extended periods of appliance in operation.
10. The burner is fully automatic in operation. All adjustments should be made by a qualified technician. Do not
push the reset button more than once.
CAUTION: do not attempt to start the burner when excess oil has accumulated, when the appliance is full of
vapor, or when the combustion chamber is very hot.
11. CAUTION: do not tamper with the appliance or controls—call your service personnel.
12. Do not use gasoline, crankcase oil, or any oil containing gasoline
13. Always keep the oil supply valve shut off if the burner is shut down for an extended period of time.
14. Do not start the burner unless the blower access door is secured in place.
15. Never burn garbage or paper in the heating system, and never leave paper or rags around the appliance.
* Furnaces only
40

IMPORTANT INSTRUCTIONS