Pre-Dive Inspection - xDEEP NX ZEN User Manual

CONNECTING THE LP HOSE
To allow for proper operation of the inflator it must be
connected to the LP port of the 1st stage of the regulator
using the LP hose supplied with the BC.
DANGER
LP HOSE CONNECTION USING THE 1ST STAGE OF
THE REGULATOR MUST BE MADE TO THE LOW
PRESSURE (LP) PORT ONLY. CONNECTION TO THE
HP PORT MAY RESULT IN SERIOUS INjURIES AS
WELL AS DAMAGE TO THE EQUIPMENT.
In order to connect the LP hose to the inflator you should
gently pull at the sleeve of the LP hose's nozzle (step 1),
and then put the nozzle onto the quick connector (step 2),
as presented in the pictures below:
STEP 01
Fig. 12. LP hose connection
32
WARNING
THE INFLATOR SUPPLY PRESSURE VALUE SHO-
ULD BE BETWEEN 6 AND 15 BAR. BEFORE CON-
NECTING THE INFLATOR TO THE LP HOSE, MAkE
SURE THAT THE PRESSURE FROM THE REGULA-
TOR IS WITHIN THIS RANGE.
STEP 02
Fig. 13. LP hose connection

PRE-DIVE INSPECTION

10