xDEEP NX Series User Manual page 9

PARTS OF PROJECT SYSTEM
PROJECT system consists of two
basic elements:
1.
Double shell PROJECT BCD;
2.
NX Series diving harness of M or XL size, in simple or
easy-to-unfasten version;
The PROJECT BC can be used with any harness which has
two mounting holes of 12mm and a spacing of 11 inches.
However, we recommend using one of high quality CE
certified NX Series harnesses.
On the following pages of this manual we described
particular elements of the system and also their
configuration and adjustment.
16
01
5
1
6
2
3
4
Fig. 1. GHOST BCD with basic harness
1. Compensator bladder
2. Shoulder strap
3. Waist strap
4. V-type crotch strap
5. Inflator hose
6. K-type inflator
7. Over pressure relief valve
k-type Power Inflator
A K-type inflator is a reliable device made of shock-proof
technopolymer which is resistant to environmental condi-
tions. The inflator valve is made of metal, which makes
the inflator more resistant to freezing and it can be oper-
ated much longer than inflators made entirely of plastic.
The inflator is equipped with an inflator button (1) to
inflate the BC with air, a purge button (2) to deflate the BC
or inflate it orally, and a mouthpiece (3) to release the air
that is deflated or inhale the BC orally.
03
7
1
2
3
17