Using The Utility - TRENDnet Powerline 1300 AV2 Adapter User Manual

TRENDnet User's Guide

Using the Utility

Before using the utility, please do the following:
1. Write down the Device Password (DPW) (16-digit characters A-Z only) and
MAC Address (12-digit characters a-f, A-F, 0-9) of each Powerline adapter
as this will be required to change the network name for multiple Powerline
adapters. Both the DPW and MAC Address can be found on the device
label on the back of each powerline device.
2. Make sure the computer in which you are installing the utility is connected
to your network and your Powerline adapters are also connected to your
network.
3. If you have changed your network name using the Sync button and you are
creating a customized network name, it is required to reset all powerline
devices to defaults using the physical Reset button on your Powerline
adapter first before using the utility. See Product Outlook on page 2.
4. Please ensure that your Powerline adapters are already installed and
connected and the Ethernet port on each adapter is connected to a device
powered on.
© Copyright 2018 TRENDnet. All Rights Reserved.
Upon completing the software installation, a desktop shortcut is automatically created.
Double-click the icon to start the utility or open the utility if it is already running. Closing
the utility will exit the application.
You can also launch the utility from Start Menu. Start > Programs (or All Programs) >
TRENDnet > TRENDnet Powerline Utility.
TPL-422E / TPL-422E2K
12