LG WD1485ATB Service Manual page 42

PUMP
HEATER
1 Remove pump outlet hose.
2 Remove tub pump bellows.
3 Remove cap(Remaining Hose).
4 Disconnect the wiring.
5 Three screws are unscrewed from the cabinet.
6 Remove the pump to arrow direction.
• Rating : 127V 60Hz
• Resistant : 162~176Ω
1 Loosen the nut.
2 Remove washing heater by pulling out.
< Heater for Washing>
• Rating : 120 1 V 000W
• Resistant : 24.5~28.5Ω
CAUTION
When assembling the washing heater, insert
the heater to heater clip on the bottom of tub
and check the position of wire color.
45