Table of Contents
Advertisement
1. Lock-off button
2. Handle
3. Switch trigger
1
1. Light
2. Light switch
14
Switch action
006974
CAUTION:
1
•
Before plugging in the tool, always check to see that the switch trigger
2
actuates properly and returns to the "OFF" position when released.
•
When not using the tool, remove the lock-off button and store it in a
secure place. This prevents unauthorized operation.
3
•
Do not pull the switch trigger hard without pressing in the lock-off button.
This can cause switch breakage.
To prevent the switch trigger from being accidentally pulled, a lock-off button is
provided. To start the tool, press in the lock-off button and pull the switch trig-
ger. Release the switch trigger to stop.
WARNING:
•
NEVER use tool without a fully operative switch trigger. Any tool with an
inoperative switch is HIGHLY DANGEROUS and must be repaired before
further usage.
•
For your safety, this tool is equipped with a lock-off button which prevents
the tool from unintended starting. NEVER use the tool if it runs when you
simply pull the switch trigger without pressing the lock-off button. Return
tool to a Makita service center for proper repairs BEFORE further usage.
•
NEVER tape down or defeat purpose and function of lock-off button.
Lighting up the lamps
006975
CAUTION:
•
This is not a rainproof light. Do not wash the light in water or use it in a
rain or a wet area. Such a conduct can cause an electric shock and
fume.
2
•
Do not touch the lens of the light, as it is very hot while it is lighted or
shortly after it is turned off. This may cause a burn to a human body.
•
Do not apply impact to the light, which may cause damage or shorted
service time to it.
•
Do not keep casting the beam of the light to your eyes. This can cause
your eyes to be hurt.
•
Do not cover the light with clothes, carton, cardboard or similar objects
while it is lighted, which can cause a fire or an ignition.
Push the upper position of the switch for turning on the light and the lower
position for off.
Move the light to shift an area of lighting.
NOTE:
•
Use a dry cloth to wipe the dirt off the lens of lamp. Be careful not to
scratch the lens of light, or it may lower the illumination.
Advertisement
Table of Contents
