Table of Contents
Advertisement
2.5.2 I/O Device Configuration
I/O Device Configuration
0nboard 1394
Onboard Serial Port 1
Onboard Parallel Port
Parallel Port Mode
ECP Mode USE DMA
EPP Mode Select
VIA-3058 AC97 Audio
Onboard LAN
Onboard LAN Boot ROM
Game Port Address
MIDI Port Address
MIDI Port IRQ
↑↓
↑↓
F1
: Help
↑↓
↑↓
↑↓
ESC : Exit
→←
→←
→←
→←
→←
Onboard 1394 [Enabled]
This field allows you to enable or disable the onboard IEEE 1394 controller.
Configuration options: [Disabled] [Enabled]
Onboard Serial Port 1 [3F8/IRQ4]
These fields allow you to set the address for the onboard serial connector.
Configuration options: [Disabled] [3F8/IRQ4] [2F8/1RQ3] [3E8/IRQ4] [2E8/IRQ3]
[Auto]
Onboard Parallel Port [378/IRQ7]
This field allows you to set the address of the onboard parallel port connector.
Configuration options: [Disabled] [378/IRQ7] [278/IRQ5] [3BC/1RQ7]
Parallel Port Mode [ECP+EPP]
This field allows you to set the parallel port operation mode. Setting to [SPP] allows
normal speed operation but in one direction only. [EPP] allows bi-directional
parallel port operation. [ECP] allows bi-directional DMA mode operation, while
[ECP+EPP] allows normal speed operation in a two-way mode.
Configuration options: [SPP] [EPP] [ECP] [ECP+EPP]
ECP Mode USE DMA [3]
This field sets the parallel port DMA channel for the selected ECP mode. The
default setting is 3. This selection is available only if you select [ECP] or
[ECP+EPP] in the Parallel Port Mode item. Configuration options: [1] [3]
EPP Mode Select [EPP1.7]
This field sets the EPP mode. The default setting is EPP1.7. This selection is
available when you set the Parallel Port Mode to [EPP] or [ECP+EPP].
Configuration options: [EPP1.9] [EPP1.7]
ASUS A7V400-MX motherboard user guide
[Enabled]
[3F8/IRQ4]
[378/IRQ7]
[ECP+EPP]
[3]
[EPP1.7]
[Auto]
[Auto]
[Disabled]
[201]
[330]
[10]
: Select Item
-/+
: Select Menu
Enter : Select Sub-menu
Select Menu
Item Specific Help
: Change Value
F5 : Setup Defaults
F10 : Save and Exit
2-19
Advertisement
Table of Contents
