Download Print this page

Advertisement

®
A7V
JumperFree™ PC133/VC133
200MHz FSB AGP Pro/4X
Socket A Motherboard
USER'S MANUAL

Advertisement

   Also See for Asus A7V

   Summary of Contents for Asus A7V

  • Page 1

    ® JumperFree™ PC133/VC133 200MHz FSB AGP Pro/4X Socket A Motherboard USER’S MANUAL...

  • Page 2

    Product warranty or service will not be extended if: (1) the product is repaired, modified or al- tered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the product is defaced or missing.

  • Page 3: Asus Contact Information

    Notebook (Tel): +886-2-2890-7122 (English) Desktop/Server (Tel):+886-2-2890-7123 (English) Fax: +886-2-2893-7775 Email: tsd@asus.com.tw WWW: www.asus.com.tw FTP: ftp.asus.com.tw/pub/ASUS ASUS COMPUTER INTERNATIONAL (America) Marketing Address: 6737 Mowry Avenue, Mowry Business Center, Building 2 Newark, CA 94560, USA Fax: +1-510-608-4555 Email: tmd1@asus.com Technical Support Fax:...

  • Page 4: Table Of Contents

    1. INTRODUCTION 1.1 How This Manual Is Organized ........... 7 1.2 Item Checklist ................7 2. FEATURES 2.1 The ASUS A7V ................8 2.1.1 Specifications ..............8 2.1.2 Special Features ..............10 2.1.3 Optional Components ............10 2.1.4 Performance Features ............10 2.1.5 Intelligence ...............

  • Page 5

    5.3 A7V Series Motherboard Support CD ........82 6. SOFTWARE REFERENCE 6.1 ASUS PC Probe ................. 84 6.1.1 Starting ASUS PC Probe ..........84 6.2 CyberLink PowerPlayer SE ............88 6.3 CyberLink PowerDVD .............. 91 6.4 CyberLink VideoLive Mail ............91 7.

  • Page 6: Federal Communications Commission Statement

    Radio Interference Regulations of the Canadian Department of Communications. This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. ASUS A7V User’s Manual...

  • Page 7: Introduction

    ASUS MR-I Modem Riser Card UltraDMA/33 IDE drives (1) Ribbon cable for one 5.25” and two 3.5” floppy disk drives (1) ASUS 3-port USB Connector Set (1) Bag of spare jumper caps (1) ASUS Support CD with drivers and utilities (1) This Motherboard User’s...

  • Page 8: Features

    2. FEATURES 2.1 The ASUS A7V The ASUS A7V motherboard is carefully designed for the demanding PC user who wants advanced features processed by the fastest processors. 2.1.1 Specifications • AMD Athlon™/Duron™ Processor Support: Supports Socket A-based AMD Athlon™/Duron™ processors.

  • Page 9

    • PC Health Monitoring: Provides an easy way to examine and manage system status information, such as CPU and system voltages, temperatures, and fan status through the onboard hardware ASUS ASIC and the bundled ASUS PC Probe. • SMBus: Features the System Management Bus interface, which is used to physi- cally transport commands and information between SMBus devices.

  • Page 10: Special Features

    32-bit device drivers and installation procedures for Windows95/98/NT . Color-coded connectors and descriptive icons make identification easy as required by PC 99. • Symbios SCSI BIOS: Supports optional ASUS SCSI controller cards through the onboard SYMBIOS firmware. 2.1.3 Optional Components •...

  • Page 11: Intelligence

    • Chassis Intrusion Detection: Supports chassis-intrusion monitoring through the ASUS ASIC. A chassis intrusion event is kept in memory on battery power for more protection. ASUS A7V User’s Manual...

  • Page 12: Motherboard Components

    1 Microphone Connector (on audio model only) ... (Bottom) 23 Network Features Wake-On-LAN Connector ............17 Wake-On-Ring Connector ............13 Hardware Monitoring System Voltage Monitoring (integrated in ASUS ASIC) ..15 3 Fan Power and Speed Monitoring Connectors Power ATX Power Supply Connector ..........5 Special Feature Onboard LED .................

  • Page 13: Component Locations

    2. FEATURES 2.2.1 Component Locations 11 10 ASUS A7V User’s Manual...

  • Page 14: Hardware Setup

    PCI Slot 5 IDELED USB3 USBPORT PANEL USB3A Audio Modem Riser (AMR) Grayed components are optional at the time of purchase ( is no longer neces- JTCPU sary on motherboards with PCB versions 1.02 and later) ASUS A7V User’s Manual...

  • Page 15: Layout Contents

    13) WOR p. 36 Wake-On-Ring Connector (2 pins) 14) PWR_, CPU_,CHA_FAN p. 37 Chassis, Power Supply, CPU, F_ Fan Connectors (3 pins) F_FAN 15) CD_IN, AUX, MODEM p. 38 Internal Audio Connectors (4 4-pin) (optional) continued... ASUS A7V User’s Manual...

  • Page 16

    42 System Message LED (2 pins) 25) SMI (PANEL) p. 42 System Management Interrupt Lead (2 pins) 26) PWR.SW (PANEL) p. 42 ATX / Soft-Off Switch Lead (2 pins) 27) RESET (PANEL) p. 42 Reset Switch Lead (2 pins) ASUS A7V User’s Manual...

  • Page 17: Hardware Setup Procedure

    Failure to do so may cause severe damage to your motherboard, peripherals, and/or components. The onboard LED when lit acts as a reminder that the system is in suspend or soft-off mode and not powered OFF. Standby Powered Power A7V Onboard LED ASUS A7V User’s Manual...

  • Page 18

    (See #8 Voltage [1-2] Frequency Setting) Regulator Output) JumperFree™Mode All OFF All [3-4] [2-3](Default) Jumper Mode JumperFree Mode (Default) See External Frequency Setting VID4 See Voltage Reg. VID3 Out. (VID) VID2 VID1 A7V Jumper Mode Settings ASUS A7V User’s Manual...

  • Page 19

    This jumper allows you to select the voltage supplied to PCI devices. If you have PCI devices that require auxiliary power, set this jumper to 3 VSB. Setting 3VSBSLT 3 Volt [1-2] 3 VSB [2-3] (default) 3VSBSLT Add 3 Volt Add 3 VSB (Default) A7V PCI 3Volt Selection ASUS A7V User’s Manual...

  • Page 20

    A7V VIO Setting WARNING! Using a higher voltage may help when overclocking but may re- sult in the shortening of your computer component’s life. It is strongly recom- mended that you leave this setting on its default. ASUS A7V User’s Manual...

  • Page 21

    Menu in BIOS Setup so you can set the CPU Frequency). WARNING! Frequencies other than the recommended CPU bus frequencies are not guaranteed to be stable. Overclocking your processor is not recommended. It may result in slower speeds than expected and premature wear of the processor. ASUS A7V User’s Manual...

  • Page 22

    2. To use this feature, JEN must be set to Jumper Mode: [1-2]; [See item #2 in this section, Hardware Setup]. 3. Processor speeds may be also be adjusted in JumperFree Mode using BIOS software. For more up to date processor settings, visit the ASUS web site: www.asus.com (see ASUS CONTACT INFORMATION). ASUS A7V User’s Manual...

  • Page 23

    VID3 VID2 VID2 VID2 VID2 VID1 VID1 VID1 VID1 1.375/1.4Volts 1.325/1.35Volts 1.275/1.30Volts 1.225/1.25Volts VID4 VID4 VID4 VID4 VID3 VID3 VID3 VID3 VID2 VID2 VID2 VID2 VID1 VID1 VID1 VID1 1.175/1.20Volts 1.125/1.15Volts 1.075/1.10Volts CPU Default/ JumperFree (Default) ASUS A7V User’s Manual...

  • Page 24: System Memory (dimm)

    For the system CPU bus to operate at MHz/133MHz, use only PC100-/PC133- compliant DIMMs. • ASUS motherboards support SPD (Serial Presence Detect) DIMMs. This is the memory of choice for best performance vs. stability. • SDRAM chips are generally thinner with higher pin density than EDO (Extended Data Output) chips.

  • Page 25: Memory Installation

    DIMM slot on the motherboard. You must tell your retailer the correct DIMM type before purchasing. This motherboard supports four clock signals per DIMM. ASUS A7V User’s Manual...

  • Page 26: Central Processing Unit (cpu)

    CAUTION! Be careful not to scrape the motherboard surface when mounting a clamp-style processor fan or else damage may occur to the motherboard. BLANK LEVER LOCK AMD™ Athlon A7V Socket 462 (Socket A) NOTCH ASUS A7V User’s Manual...

  • Page 27: Expansion Cards

    4. Secure the card on the slot with the screw you removed above. 5. Replace the computer system’s cover. 6. Set up the BIOS if necessary (see 4.4.3 PCI Configuration) 7. Install the necessary software drivers for your expansion card. ASUS A7V User’s Manual...

  • Page 28: Accelerated Graphics Port Pro (agp Pro)

    PCI slot 5 — — — shared AGP Pro slot shared — — — Onboard USB controller — — — shared Onboard audio/AMR — — shared — Promise ATA100 — shared — — SMBus — — — — ASUS A7V User’s Manual...

  • Page 29: Assigning Irqs For Expansion Cards

    3.7.3 Accelerated Graphics Port Pro (AGP Pro) This motherboard provides an Accelerated Graphics Port Pro (AGP Pro) slot to sup- port AGP/AGP Pro graphics cards, such as an ASUS AGP-V6800DDR/64M. CAUTION! To avoid damaging your AGP/AGP Pro graphics card, your computer’s power supply should be unplugged before inserting your graphics card into the slot.

  • Page 30: Audio Modem Riser (amr) Slot

    For availability, see your vendor or dealer. ASUS MR-1 Unlike that of standard cards, the component side of the specially-designed AMR card faces the motherboard’s expansion slots when the card is installed A7V Audio Modem Riser (AMR) Slot ASUS A7V User’s Manual...

  • Page 31: External Connectors

    This connection is for a standard keyboard using an PS/2 plug (mini DIN). This connector will not allow standard AT size (large DIN) keyboard plugs. You may use a DIN to mini DIN adapter on standard AT keyboards. PS/2 Keyboard (6-pin Female) ASUS A7V User’s Manual...

  • Page 32

    5) Parallel Port Connector (Burgundy 25-pin PRINTER) You can enable the parallel port and choose the IRQ through Onboard Parallel Port (see 4.4.2 I/O Device Configuration). NOTE: Serial printers must be connected to the serial port. Parallel Port (25-pin Female) ASUS A7V User’s Manual...

  • Page 33

    (Pin 5 is removed to prevent inserting in the wrong orienta- tion when using ribbon cables with pin 5 plugged). FLOPPY NOTE: Orient the red markings on the floppy ribbon cable to PIN 1. PIN 1 A7V Floppy Disk Drive Connector ASUS A7V User’s Manual...

  • Page 34

    IMPORTANT: UltraDMA/66 and UltraDMA/100 IDE devices require a 40-pin 80-conductor cable to be enabled. NOTE: Orient the red markings (usually zigzag) on the IDE ribbon cable to PIN 1. A7V IDE Connectors PIN 1 PIN 1 ASUS A7V User’s Manual...

  • Page 35

    Chassis Signal lead, which occurs when a panel switch or light detec- tor is triggered. This function requires the optional ASUS CIDB chassis intru- sion module to be installed (see 7. APPENDIX). If the chassis intrusion lead is not used, a jumper cap must be placed over the pins to close the circuit.

  • Page 36

    12) Wake-On-LAN Connector (3-pin WOL_CON) This connector connects to a LAN card with a Wake-On-LAN output, such as the ASUS PCI-L101 Ethernet card (see 7. Appendix). The connector powers up the system when a wakeup packet or signal is received through the LAN card.

  • Page 37

    NOTE: The “Rotation” signal is to be used only by a specially designed fan with rotation signal. The Rotations per Minute (RPM) can be monitored using ASUS PC Probe (see 6. SOFTWARE REFERENCE). The Rotation signal is not supported by F-FAN.

  • Page 38

    16) Internal Microphone Header (3-pin MIC2) (optional) This connector allows you to connect a chasssis mounted microphone to the mother- board instead of having to attach an external microphone onto the ATX connectors. MIC2 A7V Microphone Header ASUS A7V User’s Manual...

  • Page 39

    SMBus devices. SMBus is a specific implementation of an I bus, which is a multi-device bus; that is, multiple chips can be connected to the same bus and each one can act as a master by initiating data transfer. A7V SMBus Connector ASUS A7V User’s Manual...

  • Page 40

    A7V ATX Power Connector 20) Power Supply Thermal Sensor Connector (2-pin block JTPWR) If you have a power supply with thermal monitoring, connect its thermal sensor cable to this connector. JTPWR A7V Power Supply Thermal Sensor Connector ASUS A7V User’s Manual...

  • Page 41

    “REV.” PCI4 PCI5 The following PANEL illustration is used for items 23–28 (next page). Speaker Connector Power LED Reset SW Message LED ATX Power SMI Lead Switch* Requires an ATX power supply. A7V System Panel Connectors ASUS A7V User’s Manual...

  • Page 42

    This 2-pin connector connects to the case-mounted reset switch for rebooting your computer without having to turn off your power switch. This is a preferred method of rebooting to prolong the life of the system’s power supply. ASUS A7V User’s Manual...

  • Page 43: Starting Up The First Time

    No DRAM installed or detected One long beep followed by Video card not found or video card three short beeps memory bad High frequency beeps when CPU overheated system is working System running at a lower frequency ASUS A7V User’s Manual...

  • Page 44

    Shut Down, and then click Shut down the computer? The power supply should turn off after Windows shuts down. NOTE: The message “You can now safely turn off your computer” will not appear when shutting down with ATX power supplies. ASUS A7V User’s Manual...

  • Page 45: Bios Setup

    4. In DOS mode, type A:\AFLASH <Enter> to run AFLASH. IMPORTANT! If “unknown” is displayed after Flash Memory:, the memory chip is either not programmable or is not supported by the ACPI BIOS and therefore, cannot be programmed by the Flash Memory Writer utility. ASUS A7V User’s Manual...

  • Page 46: Updating Bios Procedures

    BIOS revision will solve your problems. Care- less updating can result in your motherboard having more problems! 1. Download an updated ASUS BIOS file from the Internet (WWW or FTP) (see ASUS CONTACT INFORMATION on page 3 for details) and save to the disk you created earlier.

  • Page 47

    If the Flash Memory Writer utility was not able to successfully update a complete BIOS file, your system may not be able to boot up. If this happens, your system will need servicing. ASUS A7V User’s Manual...

  • Page 48

    4. BIOS SETUP (This page intentionally left blank.) ASUS A7V User’s Manual...

  • Page 49: Bios Setup Program

    POST. NOTE: Because the BIOS software is constantly being updated, the following BIOS screens and descriptions are for reference purposes only and may not re- flect your BIOS screens exactly. ASUS A7V User’s Manual...

  • Page 50: Bios Menu Bar

    Brings up a selection menu for the highlighted field <Home> or <PgUp> Moves the cursor to the first field <End> or <PgDn> Moves the cursor to the last field <F5> Resets the current screen to its Setup Defaults <F10> Saves changes and exits Setup ASUS A7V User’s Manual...

  • Page 51: General Help

    Item Specific Help window located to the right of each menu. This window displays the help text for the currently highlighted field. NOTE: The item heading in square brackets represents the default setting for that field. ASUS A7V User’s Manual...

  • Page 52: Main Menu

    This is required to support older Japanese floppy drives. Floppy 3 Mode support will allow reading and writing of 1.2MB (as opposed to 1.44MB) on a 3.5-inch diskette. Configuration options: [Disabled] [Drive A] [Drive B] [Both] ASUS A7V User’s Manual...

  • Page 53: Primary & Secondary Master/slave

    Primary IDE hard disk drives must have its partition set to active (also possible with FDISK). Other options for the Type field are: [None] - to disable IDE devices ASUS A7V User’s Manual...

  • Page 54

    NOTE: To make changes to this field, the Type field must be set to [User Type HDD] and the Translation Method field must be set to [Manual]. ASUS A7V User’s Manual...

  • Page 55

    IDE devices. Set to [Disabled] to suppress Ultra DMA capa- bility. NOTE: To make changes to this field, the Type field must be set to [User Type HDD]. Configuration options: [0] [1] [2] [3] [4] [Disabled] ASUS A7V User’s Manual...

  • Page 56: Keyboard Features

    [6/Sec] [8/Sec] [10/Sec] [12/Sec] [15/Sec] [20/Sec] [24/Sec] [30/Sec] Keyboard Auto-Repeat Delay [1/4 Sec] This field sets the time interval for displaying the first and second charac- ters. Configuration options: [1/4 Sec] [1/2 Sec] [3/4 Sec] [1 Sec] ASUS A7V User’s Manual...

  • Page 57

    Configuration options: [All Errors] [No Error] [All but Keyboard] [All but Disk] [All but Disk/Keyboard] Installed Memory [XXX MB] This display-only field displays the amount of conventional memory detected by the system during bootup. You do not need to make changes to this field. ASUS A7V User’s Manual...

  • Page 58: Advanced Menu

    CPU speed (the CPU’s inter- nal frequency). Selecting a frequency higher than what the CPU manufacturer recommends may cause the system to hang or crash. See System Hangup later in this section. ASUS A7V User’s Manual...

  • Page 59

    If detected, IRQ12 will be used for the PS/2 mouse. IRQ12 will be reserved for expansion cards only if a PS/2 mouse is not detected. [Enabled] will always reserve IRQ12, whether on startup a PS/2 mouse is detected or not. Configuration options: [Enabled] [Auto] ASUS A7V User’s Manual...

  • Page 60

    DRAM-to-CPU frequency ratio of 3:3 and a bus speed of 100MHz. You will then be led to BIOS setup to adjust the configurations. NOTE: The function: “CPU Core: Bus Frequency Multiple” is available on PCB version 1.02 and on. ASUS A7V User’s Manual...

  • Page 61: Chip Configuration

    (When AGP 4X Drive Strength set to [Manual]) Configuration options: [0] [1] [2]...[F] AGP Drive Strenght N Ctrl [E] (When AGP 4X Drive Strength set to [Manual]) Configuration options: [0] [1] [2]...[F] AGP Fast Write [Disabled] Configuration options: [Disabled] [Enabled] ASUS A7V User’s Manual...

  • Page 62

    (bytes or words) into a single 32-bit block of data. However, byte merging may only be done when the bytes within a data phase are in a prefetchable address range. Configuration options: [Disabled] [Enabled] DRAM Read Latch Delay [Auto] Configuration options: [-0.01 ns] [0.75 ns]...[Auto] ASUS A7V User’s Manual...

  • Page 63

    It can greatly improve the dis- play speed by caching the display data. You must set this to UC (uncacheable) if your display card cannot support this feature; otherwise your system may not boot. Configuration options: [UC] [USWC] ASUS A7V User’s Manual...

  • Page 64: I/o Device Configuration

    COM2 connec- tor, it will no longer work if you enable the infrared feature. See Standard and Con- sumer Infrared Module Connector in 3.8 External Connectors. Configuration op- tions: [Disabled] [Enabled] ASUS A7V User’s Manual...

  • Page 65

    If you have conflicts with the onboard modem/audio controller, you may set the appro- priate field to [Disabled]. Configuration options: [Disabled] [Auto] ASUS A7V User’s Manual...

  • Page 66

    Enable this field if you want to use the MIDI device onboard. MPU 401 I/O Base Address [300h-303h] This sets the I/O address for the onboard MIDI device. FM Enable (388h-38Bh) [Disabled] This field enables or disables the FM modulation feature. ASUS A7V User’s Manual...

  • Page 67: Pci Configuration

    [Disabled] will disable the motherboard’s Symbios SCSI BIOS so that the BIOS on an add-on Symbios SCSI card can be used. If your Symbios SCSI card does not have a BIOS, the Symbios SCSI card will not function. Con- figuration options: [Auto] [Disabled] ASUS A7V User’s Manual...

  • Page 68

    (non-PnP) device. The default value indi- cates either that the displayed IRQ is not used or that the legacy Configura- tion Utility (ICU) is being used to determine if a legacy device is using that IRQ. Configuration options: [No/ICU] [Yes] ASUS A7V User’s Manual...

  • Page 69

    (non-PnP) device. The default setting indicates either that the displayed DMA channel is not used or an ICU is being used to determine if a legacy device is using that channel. Configuration options: [No/ICU] [Yes] ASUS A7V User’s Manual...

  • Page 70

    8K, 16K, 32K, or 64K. If you are using an ICU to accomplish this task, leave Reserved MEM Block BASE to its default setting of [No/ICU]. Configu- ration options: [No/ICU] [C800] [CC00] [D000] [D400] [D800] [DC00] ASUS A7V User’s Manual...

  • Page 71: Shadow Configuration

    ROMs on them, you will need to know which addresses the ROMs use to shadow them specifically. Shadowing a ROM reduces the memory available between 640K and 1024K by the amount used for this purpose. Configuration options: [Disabled] [Enabled] ASUS A7V User’s Manual...

  • Page 72: Power Menu

    Windows 3.x and Windows 95, you need to install Windows with the APM feature. For Windows 98 and later, APM is automatically installed. A battery and power cord icon labeled “Power Management” will appear in the “Control Panel.” Choose “Advanced” in the Power Management Properties dialog box. ASUS A7V User’s Manual...

  • Page 73

    Select [ON] to make CPU Fan keep turning in Standby Mode. Configura- tion options: [ON] [OFF] Suspend Mode [Disabled] Sets the time period before the system goes into suspend mode. Configu- ration options: [Disabled] [30 Sec] [1 Min]... [40 Min] ASUS A7V User’s Manual...

  • Page 74: Power Up Control

    Turning an external modem off and then back on while the computer is off causes an initialization string that will also cause the system to power on. Configuration options: [Disabled] [Enabled] ASUS A7V User’s Manual...

  • Page 75

    [By Date]. NOTE: Automatic Power Up will not work if the system is powered down by operating sys- tems, such as Windows 98, that have ACPI support enabled. Configuration options: [Disabled] [Everyday] [By Date] ASUS A7V User’s Manual...

  • Page 76: Hardware Monitor

    NOTE: If any of the monitored items is out of range, an error message will appear: “Hardware Monitor found an error. Enter Power setup menu for details”. You will then be prompted to “Press F1 to continue, DEL to enter SETUP”. ASUS A7V User’s Manual...

  • Page 77: Boot Menu

    Make sure the ATAPI CD-ROM drive that you want to use in the boot sequence is connected to either the PRIMARY or SECONDARY IDE con- nectors, not to the ATA100 connectors. Currently, the Promise® Ultra DMA/100 chip does not support this feature. ASUS A7V User’s Manual...

  • Page 78

    40 or 80 tracks. Configuration options: [Disabled] [Enabled] SCSI/ATA100 Boot Sequence [ATA100/SCSI] Configuration options: [ATA100/SCSI] [SCSI/ATA100] Load Onboard ATA Bios [Auto] Configuration options: [Auto] [Disabled] Primary VGA Bios [PCI Card] Configuration options: [PCI Card] [AGP Card] ASUS A7V User’s Manual...

  • Page 79: Exit Menu

    This option should only be used if you do not want to save the changes you have made to the Setup program. If you have made changes to fields other than system date, system time, and password, the system will ask for con- firmation before exiting. ASUS A7V User’s Manual...

  • Page 80: Load Setup Defaults

    This option saves your selections without exiting the Setup program. You can then return to other menus and make changes. After selecting this op- tion, all selections are saved and a confirmation is requested. Select [Yes] to save any changes to the non-volatile RAM. ASUS A7V User’s Manual...

  • Page 81: Software Setup

    NOTE: Because there are various motherboard settings, options, and expansion cards, the following can only be used as a general reference and may not reflect exactly the screen contents displayed on your screen. ASUS A7V User’s Manual...

  • Page 82: A7v Series Motherboard Support Cd

    ASUS PC Probe Vx.xx: Installs a smart utility to monitor your computer’s fan, temperature, and voltages. • ASUS Update Vx.xx: Instals a program that can help you update BIOS or down- load a BIOS image file. • PC-Cillin 98 Vx.xx: Installs the PC-cillin virus protection software. View online help for more information.

  • Page 83

    (TO SEE THE FOLLOWING ITEMS, CLICK RIGHT ARROW ON THE LOWER-RIGHT CORNER OF THE MAIN MENU) • ASUS BIOS Flash Utility for LDCM 6.1: Installs a utility that remotely flashes to a client PC’s BIOS software when used in conjunction with Intel LDCM Administrator.

  • Page 84: Software Reference

    ASUS Utility, and then click Probe Vx.xx. The PC Probe icon will appear on the taskbar’s system tray indicating that ASUS PC Probe is running. Clicking the icon will allow you to see the status of your PC. ASUS A7V User’s Manual...

  • Page 85: Using Asus Pc Probe

    6. SOFTWARE REFERENCE 6.1.2 Using ASUS PC Probe Monitoring Monitor Summary Shows a summary of the items being monitored. Temperature Monitor Shows the PC’s temperature (for supported processors only). Temperature Warning threshold adjustment (Move the slider up to increase the...

  • Page 86

    CPU temperature and predefined thresh- old. Information Hard Drives Shows the used and free space of the PC’s hard disk drives and the file allo- cation table or file system used. ASUS A7V User’s Manual...

  • Page 87

    CPU type, CPU speed, and in- ternal/external frequencies, and memory size. Utility Lets you run programs outside of the ASUS Probe modules. To run a program, click Execute Program. NOTE: This feature is currently unavailable. ASUS A7V User’s Manual...

  • Page 88: Asus Pc Probe Task Bar Icon

    6. SOFTWARE REFERENCE 6.1.3 ASUS PC Probe Task Bar Icon Right clicking the PC Probe icon will bring up a menu to open or exit ASUS PC Probe and pause or resume all sys- tem monitoring. When the ASUS PC Probe...

  • Page 89: Cyberlink Powerplayer Se

    Backstep Frame Step Frame Previous Next Play Stop Configuration i-Power! Increase Volume CD Mode Mute Shuffle Decrease Volume Karaoke Next angle Next audio stream Next subtitle Add bookmark Capture frame Go-Up Repeat Menu Go to bookmark ASUS A7V User’s Manual...

  • Page 90: Cyberlink Powerdvd

    To start CyberLink PowerDVD, click the Windows Start button, point to Programs, and then CyberLink PowerDVD, and then click PowerDVD. 6.3.2 CyberLink PowerDVD User Interface Minimize Exit Main Display Control Full Screen / CD/File Control Help Eject Panel Wheel Video Window Mode (closed) Functions ASUS A7V User’s Manual...

  • Page 91: Cyberlink Videolive Mail

    VLM 3 supports all the hardware devices that are compliant with Video for Win- dows standard. Video for Windows is a well-accepted and well-tested standard. Thus, users do not have to worry about compatibility issues. ASUS A7V User’s Manual...

  • Page 92: Cyberlink Videolive Mail User Interface

    Start Playback Save Video File Snapshot to File Stop Recording / Playback Send Mail Start Recording Video Configuration Load Video File Pause Send Mail Increase MIC volume Decrease MIC volume Increase speaker volume Decrease speaker volume ASUS A7V User’s Manual...

  • Page 93: Appendix

    Motherboard type Other If you are using the ASUS PCI-L101 on an ASUS motherboard, leave the jumper on its defaut setting of “ASUS.” If you are using another brand of motherboard, set the jumper to “Other.” Connect the Wake on LAN (WOL) output signal to the motherboard’s WOL_CON in order to utilize the wake on LAN feature of the moth-...

  • Page 94: Software Driver Support

    A: To enable Wake-On-LAN function, your system requires Ethernet LAN adapter card that can activate Wake-On-LAN function, a client with Wake-On-LAN capa- bility, and software such as LDCM Rev. 3.10 or up that can trigger wake-up frame. ASUS A7V User’s Manual...

  • Page 95: Modem Riser

    4. Secure the MR card onto the chassis with the screw removed in step 2. 5. Connect the MR card’s LINE connec- tor to a telephone wall jack. Connect the PHONE connector to a telephone (optional). 6. Replace the computer chassis. ASUS A7V User’s Manual...

  • Page 96

    Motorala SM56 AC-L Modem. 9. Click Diagnostic and then click the designated COM port as shown. 10. Click More Info..If the computer sys- tem successfully communicates with the modem, responses will be displayed as shown. ASUS A7V User’s Manual...

  • Page 97: Glossary

    BIOS file into the EEPROM. Bit (Binary Digit) Represents the smallest unit of data used by the computer. A bit can have one of two values: 0 or 1. ASUS A7V User’s Manual...

  • Page 98

    IDE devices integrate the drive control circuitry directly on the drive itself, elimi- nating the need for a separate adapter card (in the case for SCSI devices). UltraDMA/ 33 IDE devices can achieve up to 33MB/Sec transfer. ASUS A7V User’s Manual...

  • Page 99

    Developed by Rambus, Inc., this type of memory can deliver up to 1.6GB of data per second. RDRAM is the first interface standard that can be directly implemented on high performance VLSI components such as, CMOS DRAMs, memory control- lers, and graphics/video ICs. ASUS A7V User’s Manual...

  • Page 100

    USB 2.0 provides twice the transfer rate compared to USB 1.0 and competes with the 1394 standard. Wake-On-LAN Computer will automatically wake-up upon receiving a wake-up packet through a Network interface when it is under power soft-off, suspend or sleep mode. ASUS A7V User’s Manual...

Comments to this Manuals

Symbols: 0
Latest comments: