Table of Contents
Advertisement
USB Legacy Support [Enabled]
This motherboard supports Universal Serial Bus (USB) devices. When enabled,
this item allows the system to detect a USB device at startup. When you set this
field to [Disabled], the USB controller legacy mode is disabled whether or not you
are using a USB device. Configuration options: [Disabled] [Enabled]
Init Display First [PCI Slot]
This option allows you to select the primary VGA type if your system has multiple
video controllers. Configuration options: [PCI Slot] [AGP]
AGP Display switch [Auto]
This option allows you to set the AGP display control to [Auto] or through the
onboard AGP controller. Configuration options: [Auto] [Onchip AGP]
DDR voltage adjustment [Auto]
This option allows you to adjust the DDR voltage.
Configuration options: [2.5V] [2.6V] [Auto]
2.5.1 Chip Configuration
AGP & P2P Bridge Control
DRAM Clock/Drive Control
CPU & PCI Bus Control
VIA OnChip IDE Device
F1
: Help
ESC : Exit
2-14
Chip Configuration
↑↓
↑↓
↑↓
: Select Item
-/+
↑↓
↑↓
→←
→←
→←
→←
→←
: Select Menu
Enter : Select Sub-menu
Select Menu
Item Specific Help
Press [Enter] to go
to sub menu.
: Change Value
F5 : Setup Defaults
F10 : Save and Exit
Chapter 2: BIOS information
Advertisement
Table of Contents
