Curtis G4CB User Manual page 10

OPERATING INSTRUCTIONS
Brewing Instructions
WARNING - TO AVOID SCALDING, AVOID SPLASHING. Keep body parts clear of the brewer during
brewing. Do not remove the brew basket while "Brewing" appears on the display.
WARNING - DO NOT refrigerate unused tea overnight for later consumption.
The G4 combo brewer is factory preset for optimal performance.
The brewer should be ON.
switch. "Ready to brew"
should be on the display.
4
into the brew rails under the
control panel. Slide it all the
way back until it stops.
The brewer will brew coffee or tea based on the settings programmed into the universal control module (UCM). To
change the settings, see the PROGRAMMING GUIDE.
TEA
DISPENSER
2 Remove the lid from
an empty coffee or tea
dispenser and position it
on the brew deck. Center it
under the brew basket.
appropriate brew icon. As
soon as you hear the click
of the brew valve, lift your
3 Select the brew basket
labeled for the type of
beverage being brewed (hot
coffee or iced tea) and insert
the proper amount of coffee
or leaf tea. Level the coffee/
6 If a keypad appears on
the display, the brew code
feature is enabled (default
is off). Brewing will start
immediately after you enter
the brew code. See the
PROGRAMMING GUIDE to
set up/disable the brew code.
OI47